2026 Honda CR-V Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Honda CR-V is 5x114.3 (5x4.5"). It has a center bore of 64.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Ball seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Honda CR-V Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 64.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 CR-V — Year-Specific Fitment Context
The 2026 model year is the final year of the Honda CR-V's 5x114.3 bolt pattern run (since 2003). Wheels from any 2003–2026 Honda CR-V are cross-compatible with the 2026 model. Across its full production run (1997–2026), the CR-V has also used: 4x114.3.
Honda CR-V Bolt Pattern by Year
Looking for all generations? View the complete Honda CR-V (1997–2026) Bolt Pattern & Generation Guide →
The table below shows how the CR-V's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| 2011 | 5x114.3 | 64.1 | 50 |
| 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
| 2025 | 5x114.3 | 64.1 | 35-45 |
| ▸ 2026 | 5x114.3 | 64.1 | 35-45 |
2026 Honda CR-V Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Honda CR-V, donor rims must match the 5x114.3 PCD and have a center bore of at least 64.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 64.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Tesla Model 3 | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Tesla Model Y | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Acura ADX | 64.1 mm (Exact) | 40 | 14x1.5 (Ball) |
| 2023 Acura ILX | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2023 Acura Integra | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2014 Acura MDX | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2017 Nissan Armada | 66.1 mm | 66.1mm → 64.1mm |
25 |
| 2024 Nissan GT-R | 66.1 mm | 66.1mm → 64.1mm |
35-45mm |
| 2017 Nissan JUKE | 66.1 mm | 66.1mm → 64.1mm |
40 |
| 2025 Nissan Kicks | 66.1 mm | 66.1mm → 64.1mm |
40-45 |
| 2025 Nissan Kicks MPV | 66.1 mm | 66.1mm → 64.1mm |
40 |
| 2025 Nissan LEAF | 66.1 mm | 66.1mm → 64.1mm |
40-45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Honda CR-V — Frequently Asked Questions
What is the bolt pattern for a 2026 Honda CR-V?
The 2026 Honda CR-V uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-45mm.
What other years of Honda CR-V have the same bolt pattern as the 2026?
The Honda CR-V uses the 5x114.3 pattern from 2003 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Honda?
The 2026 CR-V uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Honda fit my 2026 CR-V?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Why is matching the 64.1mm center bore important for the 2026 CR-V?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2026 Honda CR-V use?
The 2026 Honda CR-V uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →