2001 Honda CR-V Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Honda CR-V, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 CR-V — Year-Specific Fitment Context
The 2001 Honda CR-V is in year 5 of 6 using the 4x114.3 pattern (1997–2002). Wheels from any 1997–2002 Honda CR-V are cross-compatible with the 2001 model. Across its full production run (1997–2024), the CR-V has also used: 5x114.3.
Honda CR-V Bolt Pattern by Year
The table below shows how the CR-V's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| ▸ 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| 2011 | 5x114.3 | 64.1 | 50 |
| 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2001 Honda CR-V
For your 2001 Honda CR-V, the 4x114.3 bolt pattern is shared with 1997–2002 models, ensuring cross-compatibility. The 64.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory 50mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Ball-seat or incorrect nuts can loosen or damage the wheel. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Honda CR-V appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2003+ CR-Vs (5x114.3) without an adapter; they are not compatible.
- ✅ Check inner clearance for aftermarket wheels; the 2001 CR-V has limited space for wide tires or large brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Honda CR-V — Frequently Asked Questions
What is the bolt pattern for a 2001 Honda CR-V?
The 2001 Honda CR-V uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda CR-V have the same bolt pattern as the 2001?
The Honda CR-V uses the 4x114.3 pattern from 1997 through 2002. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2001 Honda?
The 2001 CR-V uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2001 Honda CR-V?
The factory center bore (hub bore) for the 2001 Honda CR-V is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2001 Honda CR-V?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Why is matching the 64.1mm center bore important for the 2001 CR-V?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset