2016 Honda CR-V Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Honda CR-V, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 CR-V — Year-Specific Fitment Context
The 2016 Honda CR-V is in year 14 of 22 using the 5x114.3 pattern (2003–2024). Wheels from any 2003–2024 Honda CR-V are cross-compatible with the 2016 model. Across its full production run (1997–2024), the CR-V has also used: 4x114.3.
Honda CR-V Bolt Pattern by Year
The table below shows how the CR-V's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| 2011 | 5x114.3 | 64.1 | 50 |
| 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| ▸ 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Honda CR-V
For your 2016 Honda CR-V, the bolt pattern is 5x114.3mm with a center bore of 64.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 50mm; deviating significantly may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type—use conical (60-degree) or ball seat nuts as specified. Improper lug nuts can lead to wheel loosening. Wheels from 2003–2024 CR-V models are cross-compatible, but double-check offset and bore.
Historical Fitment Data Reference
In our dataset, Honda CR-V appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 64.1mm bore is critical for centering.
- ✅ Check inner clearance for aftermarket wheels with lower offset (e.g., 45mm) to prevent strut contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Honda CR-V — Frequently Asked Questions
What is the bolt pattern for a 2016 Honda CR-V?
The 2016 Honda CR-V uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda CR-V have the same bolt pattern as the 2016?
The Honda CR-V uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What is the factory wheel offset for a 2016 Honda CR-V?
The OEM offset for the 2016 CR-V is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2016 Honda?
The 2016 CR-V uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2016 Honda CR-V?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2016 Honda CR-V?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 CR-V, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset