2025 Honda CR-V Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Honda CR-V is 5x114.3 (5x4.5"). It has a center bore of 64.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Ball seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 Honda CR-V Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 64.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 CR-V — Year-Specific Fitment Context
The 2025 Honda CR-V is in year 23 of 24 using the 5x114.3 pattern (2003–2026). Wheels from any 2003–2026 Honda CR-V are cross-compatible with the 2025 model. Across its full production run (1997–2026), the CR-V has also used: 4x114.3.
Honda CR-V Bolt Pattern by Year
Looking for all generations? View the complete Honda CR-V (1997–2026) Bolt Pattern & Generation Guide →
The table below shows how the CR-V's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| 2011 | 5x114.3 | 64.1 | 50 |
| 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
| ▸ 2025 | 5x114.3 | 64.1 | 35-45 |
| 2026 | 5x114.3 | 64.1 | 35-45 |
2025 Honda CR-V Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Honda CR-V, donor rims must match the 5x114.3 PCD and have a center bore of at least 64.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 64.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2020 Lincoln Aviator | 64.1 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2025 Lotus Eletre | 64.1 mm (Exact) | Not Applicable | 14x1.5 (Cone) |
| 2025 Tesla Model 3 | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Tesla Model Y | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Acura ADX | 64.1 mm (Exact) | 40 | 14x1.5 (Ball) |
| 2023 Acura ILX | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2022 Hyundai Veloster | 67.1 mm | 67.1mm → 64.1mm |
35-50 |
| 2025 Hyundai Venue | 67.1 mm | 67.1mm → 64.1mm |
45-50 |
| 2015 INFINITI Q40 | 66.1 mm | 66.1mm → 64.1mm |
40 |
| 2024 INFINITI Q50 | 66.1 mm | 66.1mm → 64.1mm |
40-50 |
| 2022 INFINITI Q60 | 66.1 mm | 66.1mm → 64.1mm |
40-50 |
| 2019 INFINITI Q70 | 66.1 mm | 66.1mm → 64.1mm |
40-50 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Honda CR-V — Frequently Asked Questions
What is the bolt pattern for a 2025 Honda CR-V?
The 2025 Honda CR-V uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-45mm.
What other years of Honda CR-V have the same bolt pattern as the 2025?
The Honda CR-V uses the 5x114.3 pattern from 2003 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Why is matching the 64.1mm center bore important for the 2025 CR-V?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2025 Honda CR-Vs use lug bolts or lug nuts?
The 2025 CR-V requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2025 Honda CR-V?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 64.1mm (using hub rings if larger).
Will wheels from another Honda fit my 2025 CR-V?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →