2021 Honda CR-V Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Honda CR-V, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2021 CR-V — Year-Specific Fitment Context
The 2021 Honda CR-V is in year 19 of 22 using the 5x114.3 pattern (2003–2024). Wheels from any 2003–2024 Honda CR-V are cross-compatible with the 2021 model. Across its full production run (1997–2024), the CR-V has also used: 4x114.3.
Honda CR-V Bolt Pattern by Year
The table below shows how the CR-V's wheel specifications have changed over the years. The 2021 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| 2011 | 5x114.3 | 64.1 | 50 |
| 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| ▸ 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2021 Honda CR-V
For your 2021 Honda CR-V, the bolt pattern is 5x114.3 with a 64.1mm center bore. Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibrations and ensure proper load distribution. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel loosening. Wheels from 2003–2024 CR-V models are cross-compatible, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, Honda CR-V appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check brake caliper clearance when using wheels with offset less than 40mm, as the CR-V has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Honda CR-V — Frequently Asked Questions
What is the bolt pattern for a 2021 Honda CR-V?
The 2021 Honda CR-V uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda CR-V have the same bolt pattern as the 2021?
The Honda CR-V uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2021 Honda CR-V?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 45mm offset mean for the 2021 CR-V?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
Can I use spacers on my 2021 Honda CR-V?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the center bore of a 2021 Honda CR-V?
The factory center bore (hub bore) for the 2021 Honda CR-V is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset