2022 Hyundai Kona N Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Hyundai Kona N, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Kona N — Year-Specific Fitment Context
The 2022 model year marks the beginning of the Hyundai Kona N's 5x114.3 bolt pattern era, which continued through 2023 (2 consecutive years). Wheels from any 2022–2023 Hyundai Kona N are cross-compatible with the 2022 model.
Hyundai Kona N Bolt Pattern by Year
The table below shows how the Kona N's wheel specifications have changed over the years. The 2022 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Hyundai Kona N
The 2022 Hyundai Kona N uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The offset range is 35-50mm; staying within this range maintains suspension geometry and avoids rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball seat) matching the wheel. Improper lug nuts can cause wheel detachment. Verify that aftermarket wheels are hub-centric or use rings, and confirm offset compatibility with your specific suspension setup.
Historical Fitment Data Reference
In our dataset, Hyundai Kona N appears from 2022 to 2023 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they may cause vibration and stress on wheel studs.
- ✅ Check inner clearance for brake calipers; some aftermarket wheels may require spacers or have insufficient clearance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Hyundai Kona N — Frequently Asked Questions
What is the bolt pattern for a 2022 Hyundai Kona N?
The 2022 Hyundai Kona N uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Kona N have the same bolt pattern as the 2022?
The Hyundai Kona N uses the 5x114.3 pattern from 2022 through 2023. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2022 Hyundai Kona N?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What lug nut size does the 2022 Hyundai Kona N use?
The 2022 Hyundai Kona N uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Hyundai fit my 2022 Kona N?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the PCD for a 2022 Hyundai Kona N?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Kona N, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset