2017 Jaguar F-TYPE Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Jaguar F-TYPE, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 F-TYPE — Year-Specific Fitment Context
The 2017 Jaguar F-TYPE is in year 4 of 11 using the 5x108 pattern (2014–2024). Wheels from any 2014–2024 Jaguar F-TYPE are cross-compatible with the 2017 model.
Jaguar F-TYPE Bolt Pattern by Year
The table below shows how the F-TYPE's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2017 Jaguar F-TYPE
For your 2017 Jaguar F-TYPE, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm); you must use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory spec is 35mm, but a range of 30-40mm is acceptable. Exceeding this can cause rubbing or clearance issues. Always use M12x1.50 lug nuts with the correct seat—either cone or ball seat, depending on your wheel. Never mix seat types; improper seating can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Jaguar F-TYPE appears from 2014 to 2024 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify that the hub-centric rings are made of metal (not plastic) for durability.
- ✅ Avoid wheels with offset below 30mm; they will likely rub the fender or suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Jaguar F-TYPE — Frequently Asked Questions
What is the bolt pattern for a 2017 Jaguar F-TYPE?
The 2017 Jaguar F-TYPE uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 35mm.
What other years of Jaguar F-TYPE have the same bolt pattern as the 2017?
The Jaguar F-TYPE uses the 5x108 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2017 Jaguar F-TYPE?
Refer to your owner's manual for exact specs, but always tighten the M 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2017 Jaguar F-TYPE?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 35mm, and a center bore of at least 63.4mm (using hub rings if larger).
What does 35mm offset mean for the 2017 F-TYPE?
An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jaguar.
Will wheels from another Jaguar fit my 2017 F-TYPE?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset