2019 Kia Stinger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Kia Stinger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Stinger — Year-Specific Fitment Context
The 2019 Kia Stinger is in year 2 of 6 using the 5x114.3 pattern (2018–2023). Wheels from any 2018–2023 Kia Stinger are cross-compatible with the 2019 model.
Kia Stinger Bolt Pattern by Year
The table below shows how the Stinger's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Kia Stinger
For the 2019 Kia Stinger, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 33mm; deviations affect handling and clearance. Stay within ±5mm to avoid rubbing or stress on suspension. Always use M12x1.50 lug nuts with the correct seat type (factory uses conical/60-degree). Mixing seat types can cause wheel loosening. Verify thread engagement and torque to spec. For safety, avoid universal fitment wheels without proper adapters.
Historical Fitment Data Reference
In our dataset, Kia Stinger appears from 2018 to 2023 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Ensure aftermarket wheels have a minimum 67.1mm bore or use hub-centric rings; avoid relying solely on lug nuts for centering.
- ✅ Check inner clearance for brake calipers and struts; the Stinger's tight tolerances may require spacers or specific offset wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Kia Stinger — Frequently Asked Questions
What is the bolt pattern for a 2019 Kia Stinger?
The 2019 Kia Stinger uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 33mm.
What other years of Kia Stinger have the same bolt pattern as the 2019?
The Kia Stinger uses the 5x114.3 pattern from 2018 through 2023. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2019 Kia?
The 2019 Stinger uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Kia fit my 2019 Stinger?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I put aftermarket wheels on my 2019 Kia Stinger?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 33mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2019 Kia Stinger?
The OEM offset for the 2019 Stinger is typically around 33mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset