1996 Lincoln Mark VIII Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Lincoln Mark VIII, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1996 Mark VIII — Year-Specific Fitment Context
The 1996 Lincoln Mark VIII is in year 4 of 6 using the 5x108 pattern (1993–1998). Wheels from any 1993–1998 Lincoln Mark VIII are cross-compatible with the 1996 model.
Lincoln Mark VIII Bolt Pattern by Year
The table below shows how the Mark VIII's wheel specifications have changed over the years. The 1996 model year is highlighted.
Fitment Notes
The 1996 Lincoln Mark VIII has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Lincoln Mark VIII appears from 1993 to 1998 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
1996 Lincoln Mark VIII — Frequently Asked Questions
What is the bolt pattern for a 1996 Lincoln Mark VIII?
The 1996 Lincoln Mark VIII uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 40mm.
What other years of Lincoln Mark VIII have the same bolt pattern as the 1996?
The Lincoln Mark VIII uses the 5x108 pattern from 1993 through 1998. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What is the center bore of a 1996 Lincoln Mark VIII?
The factory center bore (hub bore) for the 1996 Lincoln Mark VIII is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 1996 Lincoln Mark VIIIs use lug bolts or lug nuts?
The 1996 Mark VIII requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 63.4mm center bore important for the 1996 Mark VIII?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1996 Lincoln Mark VIII?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 Mark VIII, the PCD is 5x108.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Lincoln Mark VIII is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1993-1998 (6 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1996 Lincoln Mark VIII, please report it via our About page contact so we can verify and update this record.