2002 MAZDA Protege5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 MAZDA Protege5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 52,5 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2002 Protege5 — Year-Specific Fitment Context
The 2002 model year marks the beginning of the MAZDA Protege5's 5x114.3 bolt pattern era, which continued through 2003 (2 consecutive years). Wheels from any 2002–2003 MAZDA Protege5 are cross-compatible with the 2002 model.
MAZDA Protege5 Bolt Pattern by Year
The table below shows how the Protege5's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2002 | 5x114.3 | 67.1 | 52,5 |
| 2003 | 5x114.3 | 67.1 | 52,5 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2002 MAZDA Protege5
For your 2002 MAZDA Protege5, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match this bore, preventing vibrations. The offset range is 52-55mm; deviations may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and proper seat type (cone or ball) to avoid wheel loosening. Verify that aftermarket wheels are hub-centric or use rings for safety.
Historical Fitment Data Reference
In our dataset, MAZDA Protege5 appears from 2002 to 2003 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 47.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ Check inner clearance with the strut and outer clearance with the fender when using wider wheels or lower offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 MAZDA Protege5 — Frequently Asked Questions
What is the bolt pattern for a 2002 MAZDA Protege5?
The 2002 MAZDA Protege5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 52,5mm.
What other years of MAZDA Protege5 have the same bolt pattern as the 2002?
The MAZDA Protege5 uses the 5x114.3 pattern from 2002 through 2003. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Will wheels from another MAZDA fit my 2002 Protege5?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 2002 MAZDA Protege5?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the center bore of a 2002 MAZDA Protege5?
The factory center bore (hub bore) for the 2002 MAZDA Protege5 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2002 MAZDA Protege5 use?
The 2002 MAZDA Protege5 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset