1994 Mercedes-Benz E-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Mercedes-Benz E-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 49 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 E-Class — Year-Specific Fitment Context
The 1994 model year marks the beginning of the Mercedes-Benz E-Class's 5x112 bolt pattern era, which continued through 2024 (31 consecutive years). Wheels from any 1994–2024 Mercedes-Benz E-Class are cross-compatible with the 1994 model.
Mercedes-Benz E-Class Bolt Pattern by Year
The table below shows how the E-Class's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1994 | 5x112 | 66.6 | 49 |
| 1995 | 5x112 | 66.6 | 49 |
| 1996 | 5x112 | 66.6 | 49 |
| 1997 | 5x112 | 66.6 | 38 |
| 1998 | 5x112 | 66.6 | 38 |
| 1999 | 5x112 | 66.6 | 38 |
| 2000 | 5x112 | 66.6 | 38 |
| 2001 | 5x112 | 66.6 | 38 |
| 2002 | 5x112 | 66.6 | 38 |
| 2003 | 5x112 | 66.6 | 38 |
| 2004 | 5x112 | 66.6 | 38 |
| 2005 | 5x112 | 66.6 | 37 |
| 2006 | 5x112 | 66.6 | 37 |
| 2007 | 5x112 | 66.6 | 37 |
| 2008 | 5x112 | 66.6 | 37 |
| 2009 | 5x112 | 66.6 | 37 |
| 2010 | 5x112 | 66.6 | 37 |
| 2011 | 5x112 | 66.5 | 49 |
| 2012 | 5x112 | 66.5 | 49 |
| 2013 | 5x112 | 66.5 | 49 |
| 2014 | 5x112 | 66.5 | 49 |
| 2015 | 5x112 | 66.5 | 49 |
| 2016 | 5x112 | 66.5 | 49 |
| 2017 | 5x112 | 66.5 | 49 |
| 2018 | 5x112 | 66.5 | 39 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2023 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1994 Mercedes-Benz E-Class
For your 1994 Mercedes-Benz E-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings (66.6 to 64.1mm) to avoid vibrations. The factory offset is 49mm; deviations over ±5mm may cause rubbing or clearance issues. Always verify lug nut seat type: Mercedes uses ball seats (R14), not conical. Using incorrect lug nuts can lead to wheel detachment. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz E-Class appears from 1994 to 2024 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Use only ball-seat lug nuts (R14) with 12x1.5 thread pitch; conical nuts will damage the wheel.
- ✅ Aftermarket wheels often require hub-centric rings (66.6mm to 64.1mm) to prevent vibrations.
- ✅ Stick to offset 44-54mm; lower offsets may rub fenders, higher offsets may contact suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Mercedes-Benz E-Class — Frequently Asked Questions
What is the bolt pattern for a 1994 Mercedes-Benz E-Class?
The 1994 Mercedes-Benz E-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 49mm.
What other years of Mercedes-Benz E-Class have the same bolt pattern as the 1994?
The Mercedes-Benz E-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1994 Mercedes-Benz E-Class?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 49mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the PCD for a 1994 Mercedes-Benz E-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 E-Class, the PCD is 5x112.
Do 1994 Mercedes-Benz E-Classs use lug bolts or lug nuts?
The 1994 E-Class requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 1994 Mercedes-Benz?
The 1994 E-Class uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset