1995 Mercedes-Benz E-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Mercedes-Benz E-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 49 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 E-Class — Year-Specific Fitment Context
The 1995 Mercedes-Benz E-Class is in year 2 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz E-Class are cross-compatible with the 1995 model.
Mercedes-Benz E-Class Bolt Pattern by Year
The table below shows how the E-Class's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 49 |
| ▸ 1995 | 5x112 | 66.6 | 49 |
| 1996 | 5x112 | 66.6 | 49 |
| 1997 | 5x112 | 66.6 | 38 |
| 1998 | 5x112 | 66.6 | 38 |
| 1999 | 5x112 | 66.6 | 38 |
| 2000 | 5x112 | 66.6 | 38 |
| 2001 | 5x112 | 66.6 | 38 |
| 2002 | 5x112 | 66.6 | 38 |
| 2003 | 5x112 | 66.6 | 38 |
| 2004 | 5x112 | 66.6 | 38 |
| 2005 | 5x112 | 66.6 | 37 |
| 2006 | 5x112 | 66.6 | 37 |
| 2007 | 5x112 | 66.6 | 37 |
| 2008 | 5x112 | 66.6 | 37 |
| 2009 | 5x112 | 66.6 | 37 |
| 2010 | 5x112 | 66.6 | 37 |
| 2011 | 5x112 | 66.5 | 49 |
| 2012 | 5x112 | 66.5 | 49 |
| 2013 | 5x112 | 66.5 | 49 |
| 2014 | 5x112 | 66.5 | 49 |
| 2015 | 5x112 | 66.5 | 49 |
| 2016 | 5x112 | 66.5 | 49 |
| 2017 | 5x112 | 66.5 | 49 |
| 2018 | 5x112 | 66.5 | 39 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2023 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1995 Mercedes-Benz E-Class
For your 1995 Mercedes-Benz E-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 49mm; deviations of ±5mm are generally safe, but wider offsets may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—Mercedes uses ball seats, not conical. Mixing seat types can lead to wheel loosening. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz E-Class appears from 1994 to 2024 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 66.6mm.
- ✅ Stick to offsets between 44mm and 54mm to avoid rubbing on fenders or suspension components.
- ✅ Re-torque lug nuts to 110 Nm after 50-100 miles of driving.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Mercedes-Benz E-Class — Frequently Asked Questions
What is the bolt pattern for a 1995 Mercedes-Benz E-Class?
The 1995 Mercedes-Benz E-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 49mm.
What other years of Mercedes-Benz E-Class have the same bolt pattern as the 1995?
The Mercedes-Benz E-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Do 1995 Mercedes-Benz E-Classs use lug bolts or lug nuts?
The 1995 E-Class requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 1995 Mercedes-Benz E-Class?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.
Can I put aftermarket wheels on my 1995 Mercedes-Benz E-Class?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 49mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the factory wheel offset for a 1995 Mercedes-Benz E-Class?
The OEM offset for the 1995 E-Class is typically around 49mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset