2002 Mercedes-Benz E-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Mercedes-Benz E-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 E-Class — Year-Specific Fitment Context
The 2002 Mercedes-Benz E-Class is in year 9 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz E-Class are cross-compatible with the 2002 model.
Mercedes-Benz E-Class Bolt Pattern by Year
The table below shows how the E-Class's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 49 |
| 1995 | 5x112 | 66.6 | 49 |
| 1996 | 5x112 | 66.6 | 49 |
| 1997 | 5x112 | 66.6 | 38 |
| 1998 | 5x112 | 66.6 | 38 |
| 1999 | 5x112 | 66.6 | 38 |
| 2000 | 5x112 | 66.6 | 38 |
| 2001 | 5x112 | 66.6 | 38 |
| ▸ 2002 | 5x112 | 66.6 | 38 |
| 2003 | 5x112 | 66.6 | 38 |
| 2004 | 5x112 | 66.6 | 38 |
| 2005 | 5x112 | 66.6 | 37 |
| 2006 | 5x112 | 66.6 | 37 |
| 2007 | 5x112 | 66.6 | 37 |
| 2008 | 5x112 | 66.6 | 37 |
| 2009 | 5x112 | 66.6 | 37 |
| 2010 | 5x112 | 66.6 | 37 |
| 2011 | 5x112 | 66.5 | 49 |
| 2012 | 5x112 | 66.5 | 49 |
| 2013 | 5x112 | 66.5 | 49 |
| 2014 | 5x112 | 66.5 | 49 |
| 2015 | 5x112 | 66.5 | 49 |
| 2016 | 5x112 | 66.5 | 49 |
| 2017 | 5x112 | 66.5 | 49 |
| 2018 | 5x112 | 66.5 | 39 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2023 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2002 Mercedes-Benz E-Class
For your 2002 Mercedes-Benz E-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is sensitive; the factory 38mm offset is ideal. Deviating more than 5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—Mercedes typically uses ball seats, but aftermarket wheels may require conical or shank-style nuts. Improper lug nuts can lead to wheel loosening. Verify compatibility with your specific model variant (e.g., W210) and avoid spacers without extended studs.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz E-Class appears from 1994 to 2024 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 66.6mm bore; plastic rings are acceptable for street use.
- ✅ Check brake caliper clearance when changing offset or wheel diameter; the 2002 E-Class has tight tolerances, especially with 18-inch wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Mercedes-Benz E-Class — Frequently Asked Questions
What is the bolt pattern for a 2002 Mercedes-Benz E-Class?
The 2002 Mercedes-Benz E-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 38mm.
What other years of Mercedes-Benz E-Class have the same bolt pattern as the 2002?
The Mercedes-Benz E-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2002 Mercedes-Benz?
The 2002 E-Class uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2002 Mercedes-Benz E-Class?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 38mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the factory wheel offset for a 2002 Mercedes-Benz E-Class?
The OEM offset for the 2002 E-Class is typically around 38mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2002 Mercedes-Benz E-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 E-Class, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset