1997 Mercedes-Benz E-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Mercedes-Benz E-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 E-Class — Year-Specific Fitment Context
The 1997 Mercedes-Benz E-Class is in year 4 of 31 using the 5x112 pattern (1994–2024). Wheels from any 1994–2024 Mercedes-Benz E-Class are cross-compatible with the 1997 model.
Mercedes-Benz E-Class Bolt Pattern by Year
The table below shows how the E-Class's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x112 | 66.6 | 49 |
| 1995 | 5x112 | 66.6 | 49 |
| 1996 | 5x112 | 66.6 | 49 |
| ▸ 1997 | 5x112 | 66.6 | 38 |
| 1998 | 5x112 | 66.6 | 38 |
| 1999 | 5x112 | 66.6 | 38 |
| 2000 | 5x112 | 66.6 | 38 |
| 2001 | 5x112 | 66.6 | 38 |
| 2002 | 5x112 | 66.6 | 38 |
| 2003 | 5x112 | 66.6 | 38 |
| 2004 | 5x112 | 66.6 | 38 |
| 2005 | 5x112 | 66.6 | 37 |
| 2006 | 5x112 | 66.6 | 37 |
| 2007 | 5x112 | 66.6 | 37 |
| 2008 | 5x112 | 66.6 | 37 |
| 2009 | 5x112 | 66.6 | 37 |
| 2010 | 5x112 | 66.6 | 37 |
| 2011 | 5x112 | 66.5 | 49 |
| 2012 | 5x112 | 66.5 | 49 |
| 2013 | 5x112 | 66.5 | 49 |
| 2014 | 5x112 | 66.5 | 49 |
| 2015 | 5x112 | 66.5 | 49 |
| 2016 | 5x112 | 66.5 | 49 |
| 2017 | 5x112 | 66.5 | 49 |
| 2018 | 5x112 | 66.5 | 39 |
| 2019 | 5x112 | 66.6 | 30-50 |
| 2020 | 5x112 | 66.6 | 30-50 |
| 2021 | 5x112 | 66.6 | 30-50 |
| 2022 | 5x112 | 66.6 | 30-50 |
| 2023 | 5x112 | 66.6 | 30-50 |
| 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1997 Mercedes-Benz E-Class
For your 1997 Mercedes-Benz E-Class, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; the factory spec is 38mm, but a range of 35-42mm is acceptable. Going outside this range may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type: Mercedes uses a ball seat (R14), not a conical seat. Using the wrong lug nuts can lead to wheel loss. Verify all components before installation.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz E-Class appears from 1994 to 2024 (31 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel bearings.
- ✅ Check brake caliper clearance when using aftermarket wheels, as some designs may interfere with the caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Mercedes-Benz E-Class — Frequently Asked Questions
What is the bolt pattern for a 1997 Mercedes-Benz E-Class?
The 1997 Mercedes-Benz E-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 38mm.
What other years of Mercedes-Benz E-Class have the same bolt pattern as the 1997?
The Mercedes-Benz E-Class uses the 5x112 pattern from 1994 through 2024. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1997 Mercedes-Benz E-Class?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 38mm, and a center bore of at least 66.6mm (using hub rings if larger).
How do I measure the bolt pattern on my 1997 Mercedes-Benz?
The 1997 E-Class uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 1997 Mercedes-Benz E-Class use?
The 1997 Mercedes-Benz E-Class uses B 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 38mm offset mean for the 1997 E-Class?
An offset of 38mm means the wheel's mounting surface is 38mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset