1993 Nissan Quest Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Nissan Quest, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Quest — Year-Specific Fitment Context
The 1993 model year marks the beginning of the Nissan Quest's 5x114.3 bolt pattern era, which continued through 2017 (25 consecutive years). Wheels from any 1993–2017 Nissan Quest are cross-compatible with the 1993 model.
Nissan Quest Bolt Pattern by Year
The table below shows how the Quest's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1993 | 5x114.3 | 66.1 | 45 |
| 1994 | 5x114.3 | 66.1 | 45 |
| 1995 | 5x114.3 | 66.1 | 45 |
| 1996 | 5x114.3 | 66.1 | 45 |
| 1997 | 5x114.3 | 66.1 | 45 |
| 1998 | 5x114.3 | 66.1 | 45 |
| 1999 | 5x114.3 | 66.1 | 45 |
| 2000 | 5x114.3 | 66.1 | 45 |
| 2001 | 5x114.3 | 66.1 | 45 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 50 |
| 2012 | 5x114.3 | 66.1 | 50 |
| 2013 | 5x114.3 | 66.1 | 50 |
| 2014 | 5x114.3 | 66.1 | 50 |
| 2015 | 5x114.3 | 66.1 | 50 |
| 2016 | 5x114.3 | 66.1 | 50 |
| 2017 | 5x114.3 | 66.1 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Nissan Quest
For your 1993 Nissan Quest, the bolt pattern is 5x114.3, which it shares with many Nissan models from 1993–2017. The center bore is 66.1mm; aftermarket wheels often have a larger bore, so you must use hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; staying within ±5mm is recommended to avoid rubbing or clearance issues with suspension and brakes. Always use the correct lug nuts: thread pitch is M12x1.25, and the seat type is conical (60-degree taper). Using incorrect lug nuts can cause wheel loosening or damage. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Quest appears from 1993 to 2017 (23 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lb after 50–100 miles, then periodically check.
- ✅ Avoid wheels with offset below 40mm or above 50mm to prevent rubbing or poor handling.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 66.1mm center bore.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Nissan Quest — Frequently Asked Questions
What is the bolt pattern for a 1993 Nissan Quest?
The 1993 Nissan Quest uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 45mm.
What other years of Nissan Quest have the same bolt pattern as the 1993?
The Nissan Quest uses the 5x114.3 pattern from 1993 through 2017. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1993 Nissan Quest?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 1993 Nissan Quest?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Quest, the PCD is 5x114.3.
Can I put aftermarket wheels on my 1993 Nissan Quest?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 66.1mm (using hub rings if larger).
Will wheels from another Nissan fit my 1993 Quest?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset