2014 Nissan Quest Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Nissan Quest is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 50, and utilizes N 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 Nissan Quest Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 50 |
| Thread Size (Lug Nut / Bolt) | N 12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Quest — Year-Specific Fitment Context
The 2014 Nissan Quest is in year 22 of 25 using the 5x114.3 pattern (1993–2017). Wheels from any 1993–2017 Nissan Quest are cross-compatible with the 2014 model.
Nissan Quest Bolt Pattern by Year
The table below shows how the Quest's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 66.1 | 45 |
| 1994 | 5x114.3 | 66.1 | 45 |
| 1995 | 5x114.3 | 66.1 | 45 |
| 1996 | 5x114.3 | 66.1 | 45 |
| 1997 | 5x114.3 | 66.1 | 45 |
| 1998 | 5x114.3 | 66.1 | 45 |
| 1999 | 5x114.3 | 66.1 | 45 |
| 2000 | 5x114.3 | 66.1 | 45 |
| 2001 | 5x114.3 | 66.1 | 45 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 50 |
| 2012 | 5x114.3 | 66.1 | 50 |
| 2013 | 5x114.3 | 66.1 | 50 |
| ▸ 2014 | 5x114.3 | 66.1 | 50 |
| 2015 | 5x114.3 | 66.1 | 50 |
| 2016 | 5x114.3 | 66.1 | 50 |
| 2017 | 5x114.3 | 66.1 | 50 |
2014 Nissan Quest Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2014 Nissan Quest, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2017 INFINITI Q50 | 66.1 mm (Exact) | 46 | N 12x1.25 (Cone) |
| 2014 INFINITI Q60 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2014 INFINITI Q70 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 1997 INFINITI QX | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2017 INFINITI QX30 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2014 INFINITI QX50 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 Jeep Cherokee | 71.6 mm | 71.6mm → 66.1mm |
32 |
| 1992 Jeep Comanche Regular Cab | 71.5 mm | 71.5mm → 66.1mm |
30-40mm |
| 2007 Jeep Compass | 67.1 mm | 67.1mm → 66.1mm |
40 |
| 1993 Jeep Grand Cherokee | 71.6 mm | 71.6mm → 66.1mm |
25 |
| 2002 Jeep Liberty | 71.6 mm | 71.6mm → 66.1mm |
42 |
| 2007 Jeep Patriot | 67.1 mm | 67.1mm → 66.1mm |
40 |
Expert Buying Guide for 2014 Nissan Quest
When selecting wheels for your 2014 Nissan Quest, the 5x114.3 bolt pattern is shared across 1993–2017 models, offering many compatible options. However, the 66.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The stock offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the Quest uses 12x1.25 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. For safety, re-torque after 50–100 miles and avoid spacers unless professionally installed.
Historical Fitment Data Reference
In our dataset, Nissan Quest appears from 1993 to 2017 (23 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings with aftermarket wheels to match the 66.1mm center bore; plastic rings are fine for street use, but aluminum is better for track.
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles of driving, as wheel settling can reduce clamping force.
- ✅ Avoid using universal fit wheels with slotted holes; they may not center properly on the Quest's hub, leading to vibration and potential lug nut failure.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2014 Nissan Quest — Frequently Asked Questions
What is the bolt pattern for a 2014 Nissan Quest?
The 2014 Nissan Quest uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 50mm.
What other years of Nissan Quest have the same bolt pattern as the 2014?
The Nissan Quest uses the 5x114.3 pattern from 1993 through 2017. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Why is matching the 66.1mm center bore important for the 2014 Quest?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2014 Nissan Quest?
The factory center bore (hub bore) for the 2014 Nissan Quest is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2014 Nissan Quest?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2014 Nissan Quest?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →