1994 Nissan Quest Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Nissan Quest, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 Quest — Year-Specific Fitment Context
The 1994 Nissan Quest is in year 2 of 25 using the 5x114.3 pattern (1993–2017). Wheels from any 1993–2017 Nissan Quest are cross-compatible with the 1994 model.
Nissan Quest Bolt Pattern by Year
The table below shows how the Quest's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 66.1 | 45 |
| ▸ 1994 | 5x114.3 | 66.1 | 45 |
| 1995 | 5x114.3 | 66.1 | 45 |
| 1996 | 5x114.3 | 66.1 | 45 |
| 1997 | 5x114.3 | 66.1 | 45 |
| 1998 | 5x114.3 | 66.1 | 45 |
| 1999 | 5x114.3 | 66.1 | 45 |
| 2000 | 5x114.3 | 66.1 | 45 |
| 2001 | 5x114.3 | 66.1 | 45 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 50 |
| 2012 | 5x114.3 | 66.1 | 50 |
| 2013 | 5x114.3 | 66.1 | 50 |
| 2014 | 5x114.3 | 66.1 | 50 |
| 2015 | 5x114.3 | 66.1 | 50 |
| 2016 | 5x114.3 | 66.1 | 50 |
| 2017 | 5x114.3 | 66.1 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 Nissan Quest
For your 1994 Nissan Quest, the bolt pattern is 5x114.3 with a center bore of 66.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.25) and seat type—use conical (60-degree) or ball-seat lug nuts as specified. Never mix seat types. After installation, re-torque lug nuts to 80-100 ft-lbs after 50-100 miles. Wheels from any 1993-2017 Nissan Quest are cross-compatible.
Historical Fitment Data Reference
In our dataset, Nissan Quest appears from 1993 to 2017 (23 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (66.1mm ID to aftermarket bore) to avoid vibrations; plastic rings suffice for street use.
- ✅ Re-torque lug nuts after 50-100 miles; factory spec is 80-100 ft-lbs, but check your specific wheel manufacturer's recommendation.
- ✅ Avoid offset below 40mm on front wheels to prevent rubbing against strut or fender liner; test fit before finalizing.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Nissan Quest — Frequently Asked Questions
What is the bolt pattern for a 1994 Nissan Quest?
The 1994 Nissan Quest uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 45mm.
What other years of Nissan Quest have the same bolt pattern as the 1994?
The Nissan Quest uses the 5x114.3 pattern from 1993 through 2017. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1994 Nissan?
The 1994 Quest uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 1994 Nissan Quest use?
The 1994 Nissan Quest uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 1994 Nissan Quest?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 Quest, the PCD is 5x114.3.
Will wheels from another Nissan fit my 1994 Quest?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset