2011 Nissan Quest Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Nissan Quest, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Quest — Year-Specific Fitment Context
The 2011 Nissan Quest is in year 19 of 25 using the 5x114.3 pattern (1993–2017). Wheels from any 1993–2017 Nissan Quest are cross-compatible with the 2011 model.
Nissan Quest Bolt Pattern by Year
The table below shows how the Quest's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 66.1 | 45 |
| 1994 | 5x114.3 | 66.1 | 45 |
| 1995 | 5x114.3 | 66.1 | 45 |
| 1996 | 5x114.3 | 66.1 | 45 |
| 1997 | 5x114.3 | 66.1 | 45 |
| 1998 | 5x114.3 | 66.1 | 45 |
| 1999 | 5x114.3 | 66.1 | 45 |
| 2000 | 5x114.3 | 66.1 | 45 |
| 2001 | 5x114.3 | 66.1 | 45 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| ▸ 2011 | 5x114.3 | 66.1 | 50 |
| 2012 | 5x114.3 | 66.1 | 50 |
| 2013 | 5x114.3 | 66.1 | 50 |
| 2014 | 5x114.3 | 66.1 | 50 |
| 2015 | 5x114.3 | 66.1 | 50 |
| 2016 | 5x114.3 | 66.1 | 50 |
| 2017 | 5x114.3 | 66.1 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Nissan Quest
For the 2011 Nissan Quest, the 5x114.3 bolt pattern is shared across 1993–2017 models, but critical specs differ. The 66.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and hub damage. Offset is sensitive; the factory 50mm offset ensures proper suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical 60-degree for most aftermarket wheels; factory uses ball seat). Improper lug nuts can loosen or damage wheels. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Nissan Quest appears from 1993 to 2017 (23 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Aftermarket wheels often require hub-centric rings (66.1mm to 73.1mm) to avoid vibrations.
- ✅ Check brake caliper clearance when using wheels with offset below 45mm or above 55mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Nissan Quest — Frequently Asked Questions
What is the bolt pattern for a 2011 Nissan Quest?
The 2011 Nissan Quest uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 50mm.
What other years of Nissan Quest have the same bolt pattern as the 2011?
The Nissan Quest uses the 5x114.3 pattern from 1993 through 2017. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the center bore of a 2011 Nissan Quest?
The factory center bore (hub bore) for the 2011 Nissan Quest is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Nissan fit my 2011 Quest?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the PCD for a 2011 Nissan Quest?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Quest, the PCD is 5x114.3.
Can I use spacers on my 2011 Nissan Quest?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset