2006 Nissan Quest Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Nissan Quest, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 Quest — Year-Specific Fitment Context
The 2006 Nissan Quest is in year 14 of 25 using the 5x114.3 pattern (1993–2017). Wheels from any 1993–2017 Nissan Quest are cross-compatible with the 2006 model.
Nissan Quest Bolt Pattern by Year
The table below shows how the Quest's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 66.1 | 45 |
| 1994 | 5x114.3 | 66.1 | 45 |
| 1995 | 5x114.3 | 66.1 | 45 |
| 1996 | 5x114.3 | 66.1 | 45 |
| 1997 | 5x114.3 | 66.1 | 45 |
| 1998 | 5x114.3 | 66.1 | 45 |
| 1999 | 5x114.3 | 66.1 | 45 |
| 2000 | 5x114.3 | 66.1 | 45 |
| 2001 | 5x114.3 | 66.1 | 45 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| ▸ 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 50 |
| 2012 | 5x114.3 | 66.1 | 50 |
| 2013 | 5x114.3 | 66.1 | 50 |
| 2014 | 5x114.3 | 66.1 | 50 |
| 2015 | 5x114.3 | 66.1 | 50 |
| 2016 | 5x114.3 | 66.1 | 50 |
| 2017 | 5x114.3 | 66.1 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 Nissan Quest
For your 2006 Nissan Quest, the bolt pattern is 5x114.3 with a center bore of 66.1mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibrations. The offset is critical: stock is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.25) and seat type—use conical (60-degree) or ball seat lug nuts as specified. Never reuse old lug nuts with new wheels. Improper fitment compromises safety and handling. Consult a professional if unsure.
Historical Fitment Data Reference
In our dataset, Nissan Quest appears from 1993 to 2017 (23 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid spacers unless hub-centric and properly torqued; they alter offset and stress bearings.
- ✅ Check brake caliper clearance when fitting wheels with different offset or larger diameter.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Nissan Quest — Frequently Asked Questions
What is the bolt pattern for a 2006 Nissan Quest?
The 2006 Nissan Quest uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Quest have the same bolt pattern as the 2006?
The Nissan Quest uses the 5x114.3 pattern from 1993 through 2017. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What lug nut size does the 2006 Nissan Quest use?
The 2006 Nissan Quest uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2006 Nissan Quest?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2006 Nissan Quest?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
What is the center bore of a 2006 Nissan Quest?
The factory center bore (hub bore) for the 2006 Nissan Quest is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset