2000 Nissan Quest Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Nissan Quest, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 Quest — Year-Specific Fitment Context
The 2000 Nissan Quest is in year 8 of 25 using the 5x114.3 pattern (1993–2017). Wheels from any 1993–2017 Nissan Quest are cross-compatible with the 2000 model.
Nissan Quest Bolt Pattern by Year
The table below shows how the Quest's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 66.1 | 45 |
| 1994 | 5x114.3 | 66.1 | 45 |
| 1995 | 5x114.3 | 66.1 | 45 |
| 1996 | 5x114.3 | 66.1 | 45 |
| 1997 | 5x114.3 | 66.1 | 45 |
| 1998 | 5x114.3 | 66.1 | 45 |
| 1999 | 5x114.3 | 66.1 | 45 |
| ▸ 2000 | 5x114.3 | 66.1 | 45 |
| 2001 | 5x114.3 | 66.1 | 45 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 50 |
| 2012 | 5x114.3 | 66.1 | 50 |
| 2013 | 5x114.3 | 66.1 | 50 |
| 2014 | 5x114.3 | 66.1 | 50 |
| 2015 | 5x114.3 | 66.1 | 50 |
| 2016 | 5x114.3 | 66.1 | 50 |
| 2017 | 5x114.3 | 66.1 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Nissan Quest
For your 2000 Nissan Quest, the 5x114.3 bolt pattern is shared across 1993–2017 models, ensuring broad compatibility. However, the 66.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is sensitive; stock is 45mm. Sticking within ±5mm is safe, but deviations may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball seat, matching the wheel). Improper seating can lead to wheel loss. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Nissan Quest appears from 1993 to 2017 (23 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check for brake caliper clearance when changing offset, especially with larger diameter wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Nissan Quest — Frequently Asked Questions
What is the bolt pattern for a 2000 Nissan Quest?
The 2000 Nissan Quest uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 45mm.
What other years of Nissan Quest have the same bolt pattern as the 2000?
The Nissan Quest uses the 5x114.3 pattern from 1993 through 2017. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I use spacers on my 2000 Nissan Quest?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
What is the PCD for a 2000 Nissan Quest?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Quest, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2000 Nissan Quest?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 66.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2000 Nissan?
The 2000 Quest uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset