2008 Nissan Rogue Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Nissan Rogue, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Rogue — Year-Specific Fitment Context
The 2008 model year marks the beginning of the Nissan Rogue's 5x114.3 bolt pattern era, which continued through 2024 (17 consecutive years). Wheels from any 2008–2024 Nissan Rogue are cross-compatible with the 2008 model.
Nissan Rogue Bolt Pattern by Year
The table below shows how the Rogue's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2008 | 5x114.3 | 66.1 | 35-45 |
| 2009 | 5x114.3 | 66.1 | 35-45 |
| 2010 | 5x114.3 | 66.1 | 35-45 |
| 2011 | 5x114.3 | 66.1 | 35-45 |
| 2012 | 5x114.3 | 66.1 | 35-45 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Nissan Rogue
For your 2008 Nissan Rogue, the 5x114.3 bolt pattern is shared with 2008-2024 models, ensuring cross-compatibility. The 66.1mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and stress on lug nuts. Offset must stay within 35-45mm; deviations risk rubbing or poor handling. Always use 12x1.25 lug nuts with the correct seat type (conical/60-degree taper for most aftermarket wheels; OEM uses ball seat). Mismatched seats cause loosening and wheel loss. Safety first: verify fitment with a test fit and consult a professional if unsure.
Historical Fitment Data Reference
In our dataset, Nissan Rogue appears from 2008 to 2024 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub rings; they can cause vibration and damage.
- ✅ Check for brake caliper clearance when using wheels with lower offset (closer to 35mm).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Nissan Rogue — Frequently Asked Questions
What is the bolt pattern for a 2008 Nissan Rogue?
The 2008 Nissan Rogue uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of Nissan Rogue have the same bolt pattern as the 2008?
The Nissan Rogue uses the 5x114.3 pattern from 2008 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the PCD for a 2008 Nissan Rogue?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Rogue, the PCD is 5x114.3.
Why is matching the 66.1mm center bore important for the 2008 Rogue?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2008 Nissan Rogues use lug bolts or lug nuts?
The 2008 Rogue requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2008 Nissan Rogue?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset