2010 Nissan Rogue Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Nissan Rogue, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Rogue — Year-Specific Fitment Context
The 2010 Nissan Rogue is in year 3 of 17 using the 5x114.3 pattern (2008–2024). Wheels from any 2008–2024 Nissan Rogue are cross-compatible with the 2010 model.
Nissan Rogue Bolt Pattern by Year
The table below shows how the Rogue's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x114.3 | 66.1 | 35-45 |
| 2009 | 5x114.3 | 66.1 | 35-45 |
| ▸ 2010 | 5x114.3 | 66.1 | 35-45 |
| 2011 | 5x114.3 | 66.1 | 35-45 |
| 2012 | 5x114.3 | 66.1 | 35-45 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Nissan Rogue
For your 2010 Nissan Rogue, the 5x114.3 bolt pattern and 66.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 35-45mm; deviating can cause rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and proper seat type (conical/60-degree for most aftermarket wheels, ball seat for OEM). Improper lug nuts can loosen or damage wheels. Verify compatibility with 2008-2024 Rogue models for direct fit.
Historical Fitment Data Reference
In our dataset, Nissan Rogue appears from 2008 to 2024 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as some aftermarket designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Nissan Rogue — Frequently Asked Questions
What is the bolt pattern for a 2010 Nissan Rogue?
The 2010 Nissan Rogue uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of Nissan Rogue have the same bolt pattern as the 2010?
The Nissan Rogue uses the 5x114.3 pattern from 2008 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Nissan Rogue?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Rogue, the PCD is 5x114.3.
What does 35-45mm offset mean for the 2010 Rogue?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Why is matching the 66.1mm center bore important for the 2010 Rogue?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2010 Nissan Rogue?
The factory center bore (hub bore) for the 2010 Nissan Rogue is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset