2020 Nissan Rogue Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2020 Nissan Rogue is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40, and utilizes 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2020 Nissan Rogue Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Rogue — Year-Specific Fitment Context
The 2020 Nissan Rogue is in year 13 of 18 using the 5x114.3 pattern (2008–2025). Wheels from any 2008–2025 Nissan Rogue are cross-compatible with the 2020 model.
Nissan Rogue Bolt Pattern by Year
The table below shows how the Rogue's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x114.3 | 66.1 | 35-45 |
| 2009 | 5x114.3 | 66.1 | 35-45 |
| 2010 | 5x114.3 | 66.1 | 35-45 |
| 2011 | 5x114.3 | 66.1 | 35-45 |
| 2012 | 5x114.3 | 66.1 | 35-45 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| ▸ 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
| 2025 | 5x114.3 | 66.1 | 35-45 |
2020 Nissan Rogue Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2020 Nissan Rogue, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2011 Nissan Maxima | 66.1 mm (Exact) | 40 | 12x1.25 (Cone) |
| 2003 Nissan Murano | 66.1 mm (Exact) | 38 | N 12x1.25 (Cone) |
| 2024 Nissan Nissan Z | 66.1 mm (Exact) | 30-45 | 12x1.25 (Flat) |
| 2013 Nissan NV200 | 66.1 mm (Exact) | 44 | N 12x1.25 (Cone) |
| 2015 Nissan NV200 Taxi | 66.1 mm (Exact) | 44 | N 12x1.25 (Cone) |
| 2014 Nissan Pathfinder | 66.1 mm (Exact) | 50 | N 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2005 Panoz Esperante | 67.1 mm | 67.1mm → 66.1mm |
30-40mm |
| 1992 Plymouth Grand Voyager | 71.5 mm | 71.5mm → 66.1mm |
40 |
| 1992 Plymouth Laser | 67.1 mm | 67.1mm → 66.1mm |
35-45mm |
| 1997 Plymouth Prowler | 71.5 mm | 71.5mm → 66.1mm |
30 |
| 1992 Plymouth Voyager | 71.5 mm | 71.5mm → 66.1mm |
40 |
| 1992 Pontiac Grand Prix | 70.1 mm | 70.1mm → 66.1mm |
52 |
Expert Buying Guide for 2020 Nissan Rogue
For your 2020 Nissan Rogue, the bolt pattern is 5x114.3 with a center bore of 66.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree) to ensure proper clamping force. Mismatched lug nuts can cause wheel separation. Verify that aftermarket wheels have sufficient load rating for the Rogue's weight. Hub-centric rings are critical for proper centering and load distribution.
Historical Fitment Data Reference
In our dataset, Nissan Rogue appears from 2008 to 2025 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and premature wear.
- ✅ Check wheel offset carefully: lower offset (e.g., 35mm) may push wheels outward, risking fender rub on lowered vehicles.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2020 Nissan Rogue — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan Rogue?
The 2020 Nissan Rogue uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Rogue have the same bolt pattern as the 2020?
The Nissan Rogue uses the 5x114.3 pattern from 2008 through 2025. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the center bore of a 2020 Nissan Rogue?
The factory center bore (hub bore) for the 2020 Nissan Rogue is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 40mm offset mean for the 2020 Rogue?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Can I put aftermarket wheels on my 2020 Nissan Rogue?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
Can I use spacers on my 2020 Nissan Rogue?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →