2014 Nissan Rogue Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Nissan Rogue is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40, and utilizes 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 Nissan Rogue Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Conical 60ยฐ (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Rogue โ Year-Specific Fitment Context
The 2014 Nissan Rogue is in year 7 of 18 using the 5x114.3 pattern (2008โ2025). Wheels from any 2008โ2025 Nissan Rogue are cross-compatible with the 2014 model.
Nissan Rogue Bolt Pattern by Year
The table below shows how the Rogue's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x114.3 | 66.1 | 35-45 |
| 2009 | 5x114.3 | 66.1 | 35-45 |
| 2010 | 5x114.3 | 66.1 | 35-45 |
| 2011 | 5x114.3 | 66.1 | 35-45 |
| 2012 | 5x114.3 | 66.1 | 35-45 |
| 2013 | 5x114.3 | 66.1 | 40 |
| โธ 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
| 2025 | 5x114.3 | 66.1 | 35-45 |
2014 Nissan Rogue Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2014 Nissan Rogue, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2008 Hyundai Santa Fe | 66.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2016 Hyundai Tucson | 66.1 mm (Exact) | 51 | N 12x1.50 (Cone) |
| 2008 INFINITI EX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2003 INFINITI FX | 66.1 mm (Exact) | 35 | N 12x1.25 (Cone) |
| 1992 INFINITI G | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD โ ID) | OEM Offset (ET) |
|---|---|---|---|
| 2013 Hyundai Accent | 67.1 mm | 67.1mm โ 66.1mm |
35-50 |
| 2006 Hyundai Azera | 67.1 mm | 67.1mm โ 66.1mm |
35-50 |
| 2008 Hyundai Elantra | 67.1 mm | 67.1mm โ 66.1mm |
35-50 |
| 2015 Hyundai Elantra GT | 67.1 mm | 67.1mm โ 66.1mm |
35-50 |
| 2023 Hyundai Elantra Hybrid | 67.1 mm | 67.1mm โ 66.1mm |
35-50 |
| 2022 Hyundai Elantra N | 67.1 mm | 67.1mm โ 66.1mm |
35-50 |
Expert Buying Guide for 2014 Nissan Rogue
For your 2014 Nissan Rogue, the bolt pattern is 5x114.3mm with a center bore of 66.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (66.1mm to wheel bore) are essential to prevent vibration and hub damage. The factory offset is 40mm; staying within ยฑ5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.25) and seat typeโfactory wheels use conical (60-degree) seats, while aftermarket may require ball or tapered seats. Improper lug nuts can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Rogue appears from 2008 to 2025 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- โ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles to ensure proper seating.
- โ Avoid using universal fit wheels without hub rings; they can cause vibration and stress on studs.
- โ Check inner clearance for aftermarket wheels; the 2014 Rogue has limited space near the strut and brake caliper.
- โ ๏ธ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- โ ๏ธ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- โ ๏ธ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2014 Nissan Rogue โ Frequently Asked Questions
What is the bolt pattern for a 2014 Nissan Rogue?
The 2014 Nissan Rogue uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Rogue have the same bolt pattern as the 2014?
The Nissan Rogue uses the 5x114.3 pattern from 2008 through 2025. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What lug nut size does the 2014 Nissan Rogue use?
The 2014 Nissan Rogue uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2014 Nissan Rogues use lug bolts or lug nuts?
The 2014 Rogue requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Nissan fit my 2014 Rogue?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Can I use spacers on my 2014 Nissan Rogue?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992โ2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →