2019 Nissan Rogue Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Nissan Rogue, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Rogue — Year-Specific Fitment Context
The 2019 Nissan Rogue is in year 12 of 17 using the 5x114.3 pattern (2008–2024). Wheels from any 2008–2024 Nissan Rogue are cross-compatible with the 2019 model.
Nissan Rogue Bolt Pattern by Year
The table below shows how the Rogue's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x114.3 | 66.1 | 35-45 |
| 2009 | 5x114.3 | 66.1 | 35-45 |
| 2010 | 5x114.3 | 66.1 | 35-45 |
| 2011 | 5x114.3 | 66.1 | 35-45 |
| 2012 | 5x114.3 | 66.1 | 35-45 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| ▸ 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Nissan Rogue
For your 2019 Nissan Rogue, the bolt pattern is 5x114.3mm with a center bore of 66.1mm. Aftermarket wheels often have a larger bore, so you must use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree taper). Never use ball-seat lug nuts on this vehicle, as they can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Rogue appears from 2008 to 2024 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations.
- ✅ Check brake caliper clearance when using wheels with offset less than 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Nissan Rogue — Frequently Asked Questions
What is the bolt pattern for a 2019 Nissan Rogue?
The 2019 Nissan Rogue uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Rogue have the same bolt pattern as the 2019?
The Nissan Rogue uses the 5x114.3 pattern from 2008 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the factory wheel offset for a 2019 Nissan Rogue?
The OEM offset for the 2019 Rogue is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Nissan fit my 2019 Rogue?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What does 40mm offset mean for the 2019 Rogue?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
What is the PCD for a 2019 Nissan Rogue?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Rogue, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset