2011 Nissan Rogue Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2011 Nissan Rogue is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 35-45, and utilizes 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2011 Nissan Rogue Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Conical 60ยฐ (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Rogue โ Year-Specific Fitment Context
The 2011 Nissan Rogue is in year 4 of 18 using the 5x114.3 pattern (2008โ2025). Wheels from any 2008โ2025 Nissan Rogue are cross-compatible with the 2011 model.
Nissan Rogue Bolt Pattern by Year
The table below shows how the Rogue's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x114.3 | 66.1 | 35-45 |
| 2009 | 5x114.3 | 66.1 | 35-45 |
| 2010 | 5x114.3 | 66.1 | 35-45 |
| โธ 2011 | 5x114.3 | 66.1 | 35-45 |
| 2012 | 5x114.3 | 66.1 | 35-45 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
| 2025 | 5x114.3 | 66.1 | 35-45 |
2011 Nissan Rogue Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2011 Nissan Rogue, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1992 INFINITI Q | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2015 INFINITI Q40 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2014 INFINITI Q50 | 66.1 mm (Exact) | 46 | N 12x1.25 (Cone) |
| 2014 INFINITI Q60 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2014 INFINITI Q70 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 1997 INFINITI QX | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD โ ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 Jeep Cherokee | 71.6 mm | 71.6mm โ 66.1mm |
32 |
| 1992 Jeep Comanche Regular Cab | 71.5 mm | 71.5mm โ 66.1mm |
30-40mm |
| 2007 Jeep Compass | 67.1 mm | 67.1mm โ 66.1mm |
40 |
| 1993 Jeep Grand Cherokee | 71.6 mm | 71.6mm โ 66.1mm |
25 |
| 2002 Jeep Liberty | 71.6 mm | 71.6mm โ 66.1mm |
42 |
| 2007 Jeep Patriot | 67.1 mm | 67.1mm โ 66.1mm |
40 |
Expert Buying Guide for 2011 Nissan Rogue
The 2011 Nissan Rogue uses a 5x114.3 bolt pattern with a 66.1mm center bore. When selecting aftermarket wheels, ensure they have a larger center bore and use hub-centric rings to prevent vibrations and ensure proper load distribution. The recommended offset range is 35-45mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat typeโfactory wheels use a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel loosening. Verify that aftermarket wheels are load-rated for the Rogue's weight. Proper fitment is critical for safety and performance.
Historical Fitment Data Reference
In our dataset, Nissan Rogue appears from 2008 to 2025 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- โ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- โ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel studs.
- โ Check brake caliper clearance when using wheels with offset near 35mm, as some aftermarket designs may interfere.
- โ ๏ธ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- โ ๏ธ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- โ ๏ธ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- โ ๏ธ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2011 Nissan Rogue โ Frequently Asked Questions
What is the bolt pattern for a 2011 Nissan Rogue?
The 2011 Nissan Rogue uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of Nissan Rogue have the same bolt pattern as the 2011?
The Nissan Rogue uses the 5x114.3 pattern from 2008 through 2025. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the center bore of a 2011 Nissan Rogue?
The factory center bore (hub bore) for the 2011 Nissan Rogue is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2011 Nissan Rogues use lug bolts or lug nuts?
The 2011 Rogue requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 35-45mm offset mean for the 2011 Rogue?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Will wheels from another Nissan fit my 2011 Rogue?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992โ2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →