2020 Nissan Sentra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Nissan Sentra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Sentra — Year-Specific Fitment Context
The 2020 Nissan Sentra is in year 8 of 12 using the 5x114.3 pattern (2013–2024). Wheels from any 2013–2024 Nissan Sentra are cross-compatible with the 2020 model. Across its full production run (1992–2024), the Sentra has also used: 4x114.3.
Nissan Sentra Bolt Pattern by Year
The table below shows how the Sentra's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 66.1 | 40 |
| 1993 | 4x114.3 | 66.1 | 40 |
| 1994 | 4x114.3 | 66.1 | 40 |
| 1995 | 4x114.3 | 66.1 | 40 |
| 1996 | 4x114.3 | 66.1 | 40 |
| 1997 | 4x114.3 | 66.1 | 40 |
| 1998 | 4x114.3 | 66.1 | 40 |
| 1999 | 4x114.3 | 66.1 | 40 |
| 2000 | 4x114.3 | 66.1 | 40 |
| 2001 | 4x114.3 | 66.1 | 40 |
| 2002 | 4x114.3 | 66.1 | 40 |
| 2003 | 4x114.3 | 66.1 | 40 |
| 2004 | 4x114.3 | 66.1 | 40 |
| 2005 | 4x114.3 | 66.1 | 40 |
| 2006 | 4x114.3 | 66.1 | 40 |
| 2007 | 4x114.3 | 66.1 | 40 |
| 2008 | 4x114.3 | 66.1 | 40 |
| 2009 | 4x114.3 | 66.1 | 40 |
| 2010 | 4x114.3 | 66.1 | 40 |
| 2011 | 4x114.3 | 66.1 | 40 |
| 2012 | 4x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| ▸ 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Nissan Sentra
For your 2020 Nissan Sentra, the critical fitment specs are: bolt pattern 5x114.3, center bore 66.1mm, offset ~40mm, and lug nut size 12x1.25. The center bore is hub-centric, meaning aftermarket wheels must either match 66.1mm or use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; staying within 35-45mm is recommended to avoid rubbing or clearance issues with suspension and fenders. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical 60-degree for most aftermarket wheels; OEM uses ball seat). Improper lug nuts can cause wheel loosening. Verify wheel bore, offset, and lug nut compatibility before purchase.
Historical Fitment Data Reference
In our dataset, Nissan Sentra appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel studs.
- ✅ Check brake caliper clearance when changing offset or wheel diameter, as the 2020 Sentra has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Nissan Sentra — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan Sentra?
The 2020 Nissan Sentra uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Sentra have the same bolt pattern as the 2020?
The Nissan Sentra uses the 5x114.3 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2020 Nissan Sentra?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the center bore of a 2020 Nissan Sentra?
The factory center bore (hub bore) for the 2020 Nissan Sentra is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2020 Nissan Sentra?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the PCD for a 2020 Nissan Sentra?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Sentra, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset