2018 Nissan Sentra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Nissan Sentra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Sentra — Year-Specific Fitment Context
The 2018 Nissan Sentra is in year 6 of 12 using the 5x114.3 pattern (2013–2024). Wheels from any 2013–2024 Nissan Sentra are cross-compatible with the 2018 model. Across its full production run (1992–2024), the Sentra has also used: 4x114.3.
Nissan Sentra Bolt Pattern by Year
The table below shows how the Sentra's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 66.1 | 40 |
| 1993 | 4x114.3 | 66.1 | 40 |
| 1994 | 4x114.3 | 66.1 | 40 |
| 1995 | 4x114.3 | 66.1 | 40 |
| 1996 | 4x114.3 | 66.1 | 40 |
| 1997 | 4x114.3 | 66.1 | 40 |
| 1998 | 4x114.3 | 66.1 | 40 |
| 1999 | 4x114.3 | 66.1 | 40 |
| 2000 | 4x114.3 | 66.1 | 40 |
| 2001 | 4x114.3 | 66.1 | 40 |
| 2002 | 4x114.3 | 66.1 | 40 |
| 2003 | 4x114.3 | 66.1 | 40 |
| 2004 | 4x114.3 | 66.1 | 40 |
| 2005 | 4x114.3 | 66.1 | 40 |
| 2006 | 4x114.3 | 66.1 | 40 |
| 2007 | 4x114.3 | 66.1 | 40 |
| 2008 | 4x114.3 | 66.1 | 40 |
| 2009 | 4x114.3 | 66.1 | 40 |
| 2010 | 4x114.3 | 66.1 | 40 |
| 2011 | 4x114.3 | 66.1 | 40 |
| 2012 | 4x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| ▸ 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Nissan Sentra
The 2018 Nissan Sentra uses a 5x114.3 bolt pattern with a 66.1mm center bore and 40mm offset. When selecting aftermarket wheels, ensure the hub bore matches or use hub-centric rings to prevent vibrations. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.25) and seat type—factory uses conical (60-degree) seats. Avoid ball-seat or shank-style lug nuts. Re-torque after 50-100 miles. Wheels from 2013-2024 Sentra models are direct fit.
Historical Fitment Data Reference
In our dataset, Nissan Sentra appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 66.1mm to avoid vibrations.
- ✅ Stick to offsets between 35-45mm to prevent rubbing on suspension or fenders.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Nissan Sentra — Frequently Asked Questions
What is the bolt pattern for a 2018 Nissan Sentra?
The 2018 Nissan Sentra uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Sentra have the same bolt pattern as the 2018?
The Nissan Sentra uses the 5x114.3 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Can I use spacers on my 2018 Nissan Sentra?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the center bore of a 2018 Nissan Sentra?
The factory center bore (hub bore) for the 2018 Nissan Sentra is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2018 Nissan Sentra use?
The 2018 Nissan Sentra uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 40mm offset mean for the 2018 Sentra?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset