1995 Nissan Sentra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Nissan Sentra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Sentra — Year-Specific Fitment Context
The 1995 Nissan Sentra is in year 4 of 21 using the 4x114.3 pattern (1992–2012). Wheels from any 1992–2012 Nissan Sentra are cross-compatible with the 1995 model. Across its full production run (1992–2024), the Sentra has also used: 5x114.3.
Nissan Sentra Bolt Pattern by Year
The table below shows how the Sentra's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 66.1 | 40 |
| 1993 | 4x114.3 | 66.1 | 40 |
| 1994 | 4x114.3 | 66.1 | 40 |
| ▸ 1995 | 4x114.3 | 66.1 | 40 |
| 1996 | 4x114.3 | 66.1 | 40 |
| 1997 | 4x114.3 | 66.1 | 40 |
| 1998 | 4x114.3 | 66.1 | 40 |
| 1999 | 4x114.3 | 66.1 | 40 |
| 2000 | 4x114.3 | 66.1 | 40 |
| 2001 | 4x114.3 | 66.1 | 40 |
| 2002 | 4x114.3 | 66.1 | 40 |
| 2003 | 4x114.3 | 66.1 | 40 |
| 2004 | 4x114.3 | 66.1 | 40 |
| 2005 | 4x114.3 | 66.1 | 40 |
| 2006 | 4x114.3 | 66.1 | 40 |
| 2007 | 4x114.3 | 66.1 | 40 |
| 2008 | 4x114.3 | 66.1 | 40 |
| 2009 | 4x114.3 | 66.1 | 40 |
| 2010 | 4x114.3 | 66.1 | 40 |
| 2011 | 4x114.3 | 66.1 | 40 |
| 2012 | 4x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1995 Nissan Sentra
For your 1995 Nissan Sentra, the bolt pattern is 4x114.3 with a center bore of 66.1mm. When selecting aftermarket wheels, ensure they match the bolt pattern and use hub-centric rings to center the wheel on the hub, preventing vibrations. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree taper) to ensure proper clamping force. Never use ball-seat lug nuts on conical-seat wheels, as this can cause wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Sentra appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles to ensure proper seating.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent fender rubbing or brake caliper contact.
- ✅ If using aftermarket wheels, verify that the center bore is at least 66.1mm; use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Nissan Sentra — Frequently Asked Questions
What is the bolt pattern for a 1995 Nissan Sentra?
The 1995 Nissan Sentra uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Sentra have the same bolt pattern as the 1995?
The Nissan Sentra uses the 4x114.3 pattern from 1992 through 2012. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What is the PCD for a 1995 Nissan Sentra?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1995 Sentra, the PCD is 4x114.3.
Why is matching the 66.1mm center bore important for the 1995 Sentra?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Nissan fit my 1995 Sentra?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Can I use spacers on my 1995 Nissan Sentra?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset