2008 Nissan Sentra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Nissan Sentra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Sentra — Year-Specific Fitment Context
The 2008 Nissan Sentra is in year 17 of 21 using the 4x114.3 pattern (1992–2012). Wheels from any 1992–2012 Nissan Sentra are cross-compatible with the 2008 model. Across its full production run (1992–2024), the Sentra has also used: 5x114.3.
Nissan Sentra Bolt Pattern by Year
The table below shows how the Sentra's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 66.1 | 40 |
| 1993 | 4x114.3 | 66.1 | 40 |
| 1994 | 4x114.3 | 66.1 | 40 |
| 1995 | 4x114.3 | 66.1 | 40 |
| 1996 | 4x114.3 | 66.1 | 40 |
| 1997 | 4x114.3 | 66.1 | 40 |
| 1998 | 4x114.3 | 66.1 | 40 |
| 1999 | 4x114.3 | 66.1 | 40 |
| 2000 | 4x114.3 | 66.1 | 40 |
| 2001 | 4x114.3 | 66.1 | 40 |
| 2002 | 4x114.3 | 66.1 | 40 |
| 2003 | 4x114.3 | 66.1 | 40 |
| 2004 | 4x114.3 | 66.1 | 40 |
| 2005 | 4x114.3 | 66.1 | 40 |
| 2006 | 4x114.3 | 66.1 | 40 |
| 2007 | 4x114.3 | 66.1 | 40 |
| ▸ 2008 | 4x114.3 | 66.1 | 40 |
| 2009 | 4x114.3 | 66.1 | 40 |
| 2010 | 4x114.3 | 66.1 | 40 |
| 2011 | 4x114.3 | 66.1 | 40 |
| 2012 | 4x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2008 Nissan Sentra
For your 2008 Nissan Sentra, the 4x114.3 bolt pattern is shared with many 1992–2012 Sentras, ensuring cross-compatibility. The 66.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset should stay close to 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with 12x1.25 thread pitch and a conical (60-degree) seat—never ball seat—to avoid wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Sentra appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (66.1mm to 73.1mm) for aftermarket wheels to avoid vibration.
- ✅ Stick to offset 35–45mm; lower offsets risk fender rubbing, higher offsets may contact suspension.
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50 miles; check for proper conical seat engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Nissan Sentra — Frequently Asked Questions
What is the bolt pattern for a 2008 Nissan Sentra?
The 2008 Nissan Sentra uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Sentra have the same bolt pattern as the 2008?
The Nissan Sentra uses the 4x114.3 pattern from 1992 through 2012. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Nissan Sentra?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
How do I measure the bolt pattern on my 2008 Nissan?
The 2008 Sentra uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2008 Nissan Sentras use lug bolts or lug nuts?
The 2008 Sentra requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2008 Nissan Sentra?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset