2026 Nissan Sentra Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Nissan Sentra is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 83 ft-lbs (113 Nm).
2026 Nissan Sentra Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 83 ft-lbs (113 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Sentra — Year-Specific Fitment Context
The 2026 model year is the final year of the Nissan Sentra's 5x114.3 bolt pattern run (since 2013). Wheels from any 2013–2026 Nissan Sentra are cross-compatible with the 2026 model. Across its full production run (1992–2026), the Sentra has also used: 4x114.3.
Nissan Sentra Bolt Pattern by Year
Looking for all generations? View the complete Nissan Sentra (1992–2026) Bolt Pattern & Generation Guide →
The table below shows how the Sentra's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 66.1 | 40 |
| 1993 | 4x114.3 | 66.1 | 40 |
| 1994 | 4x114.3 | 66.1 | 40 |
| 1995 | 4x114.3 | 66.1 | 40 |
| 1996 | 4x114.3 | 66.1 | 40 |
| 1997 | 4x114.3 | 66.1 | 40 |
| 1998 | 4x114.3 | 66.1 | 40 |
| 1999 | 4x114.3 | 66.1 | 40 |
| 2000 | 4x114.3 | 66.1 | 40 |
| 2001 | 4x114.3 | 66.1 | 40 |
| 2002 | 4x114.3 | 66.1 | 40 |
| 2003 | 4x114.3 | 66.1 | 40 |
| 2004 | 4x114.3 | 66.1 | 40 |
| 2005 | 4x114.3 | 66.1 | 40 |
| 2006 | 4x114.3 | 66.1 | 40 |
| 2007 | 4x114.3 | 66.1 | 40 |
| 2008 | 4x114.3 | 66.1 | 40 |
| 2009 | 4x114.3 | 66.1 | 40 |
| 2010 | 4x114.3 | 66.1 | 40 |
| 2011 | 4x114.3 | 66.1 | 40 |
| 2012 | 4x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
| 2025 | 5x114.3 | 66.1 | 40-45 |
| ▸ 2026 | 5x114.3 | 66.1 | 40-45 |
2026 Nissan Sentra Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Nissan Sentra, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1996 Nissan 200SX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 1996 Nissan 240SX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2020 Nissan 370Z | 66.1 mm (Exact) | 35-45 | 12x1.25 (Cone) |
| 2022 Nissan 400Z | 66.1 mm (Exact) | 20-35mm | M12x1.25 (Cone) |
| 1999 Nissan Altima | 66.1 mm (Exact) | 35-45 | 12x1.25 (Cone) |
| 2023 Nissan Ariya | 66.1 mm (Exact) | 35-45mm | M12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2017 Jeep Patriot | 67.1 mm | 67.1mm → 66.1mm |
40 |
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 66.1mm |
25 |
| 2020 Kia Cadenza | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Kia Carnival | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Kia EV6 | 67.1 mm | 67.1mm → 66.1mm |
35-45 |
| 2025 Kia EV9 | 67.1 mm | 67.1mm → 66.1mm |
35-45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 83 ft-lbs (113 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Nissan Sentra — Frequently Asked Questions
What is the bolt pattern for a 2026 Nissan Sentra?
The 2026 Nissan Sentra uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-45mm.
What other years of Nissan Sentra have the same bolt pattern as the 2026?
The Nissan Sentra uses the 5x114.3 pattern from 2013 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2026 Nissan Sentra?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-45mm, and a center bore of at least 66.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2026 Nissan?
The 2026 Sentra uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2026 Nissan Sentra?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Sentra, the PCD is 5x114.3.
Can I use spacers on my 2026 Nissan Sentra?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →