2025 Toyota Grand Highlander Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Grand Highlander is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).

2025 Toyota Grand Highlander Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 60.1 mm
Offset Range (ET) 35-45
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 76 ft-lbs (103 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 Grand Highlander — Year-Specific Fitment Context

The 2025 Toyota Grand Highlander is in year 2 of 3 using the 5x114.3 pattern (2024–2026). Wheels from any 2024–2026 Toyota Grand Highlander are cross-compatible with the 2025 model.

Toyota Grand Highlander Bolt Pattern by Year

Looking for all generations? View the complete Toyota Grand Highlander (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the Grand Highlander's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 5x114.3 60.1 35-45
▸ 2025 5x114.3 60.1 35-45
2026 5x114.3 60.1 35-45

2025 Toyota Grand Highlander Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Toyota Grand Highlander, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2026 Toyota Mirai 60.1 mm (Exact) 35-45 12x1.5 (Flat)
2023 Toyota Prius 60.1 mm (Exact) 40 12x1.5 (Flat/Mag)
2015 Toyota Prius c 60.1 mm (Exact) 45 N 12x1.50 (Flat/Mag)
2024 Toyota Prius Prime 60.1 mm (Exact) 40 12x1.5 (Flat/Mag)
2025 Toyota Prius Prime (PHEV) 60.1 mm (Exact) 40 12x1.5 (Flat)
2025 Toyota RAV4 60.1 mm (Exact) 35-45 12x1.5 (Flat)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2025 Acura ADX 64.1 mm 64.1mm → 60.1mm 40
2023 Acura ILX 64.1 mm 64.1mm → 60.1mm 45
2023 Acura Integra 64.1 mm 64.1mm → 60.1mm 45
2014 Acura MDX 64.1 mm 64.1mm → 60.1mm 45
2025 Acura RDX 64.1 mm 64.1mm → 60.1mm 35-45
2025 Acura TLX 64.1 mm 64.1mm → 60.1mm 40-50
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 Toyota Grand Highlander — Frequently Asked Questions

What is the bolt pattern for a 2025 Toyota Grand Highlander?

The 2025 Toyota Grand Highlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.

What other years of Toyota Grand Highlander have the same bolt pattern as the 2025?

The Toyota Grand Highlander uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

How tight should I torque the lug nuts on a 2025 Toyota Grand Highlander?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the factory wheel offset for a 2025 Toyota Grand Highlander?

The OEM offset for the 2025 Grand Highlander is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What is the center bore of a 2025 Toyota Grand Highlander?

The factory center bore (hub bore) for the 2025 Toyota Grand Highlander is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

What lug nut size does the 2025 Toyota Grand Highlander use?

The 2025 Toyota Grand Highlander uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Toyota Grand Highlander By Year

2024 2025 2026

Other Toyota Models

Celica Crown GR Supra GR86 Grand Highlander Hybrid Previa Prius Plug-in Hybrid Prius c RAV4 RAV4 Prime Regular Cab Sequoia Sienna Solara Tacoma Access Cab Tacoma Regular Cab Tercel Tundra Tundra Double Cab Tundra Regular Cab

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)