2026 Toyota Grand Highlander Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota Grand Highlander is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2026 Toyota Grand Highlander Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Grand Highlander — Year-Specific Fitment Context
The 2026 model year is the final year of the Toyota Grand Highlander's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 Toyota Grand Highlander are cross-compatible with the 2026 model.
Toyota Grand Highlander Bolt Pattern by Year
Looking for all generations? View the complete Toyota Grand Highlander (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Grand Highlander's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Toyota Grand Highlander Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota Grand Highlander, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2009 Toyota Corolla | 60.1 mm (Exact) | 46 | N 12x1.50 (Flat/Mag) |
| 2025 Toyota Crown | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Toyota Crown Signia | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat/Mag) |
| 2025 Toyota GR Corolla | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2024 Toyota Grand Highlander Hybrid | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat/Mag) |
| 2025 Toyota Highlander | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Acura ADX | 64.1 mm | 64.1mm → 60.1mm |
40 |
| 2023 Acura ILX | 64.1 mm | 64.1mm → 60.1mm |
45 |
| 2023 Acura Integra | 64.1 mm | 64.1mm → 60.1mm |
45 |
| 2014 Acura MDX | 64.1 mm | 64.1mm → 60.1mm |
45 |
| 2025 Acura RDX | 64.1 mm | 64.1mm → 60.1mm |
35-45 |
| 2025 Acura TLX | 64.1 mm | 64.1mm → 60.1mm |
40-50 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Toyota Grand Highlander — Frequently Asked Questions
What is the bolt pattern for a 2026 Toyota Grand Highlander?
The 2026 Toyota Grand Highlander uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Grand Highlander have the same bolt pattern as the 2026?
The Toyota Grand Highlander uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Toyota Grand Highlander?
The factory center bore (hub bore) for the 2026 Toyota Grand Highlander is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2026 Toyota Grand Highlander?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Grand Highlander, the PCD is 5x114.3.
How tight should I torque the lug nuts on a 2026 Toyota Grand Highlander?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2026 Toyota Grand Highlander?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →