2010 Volvo V50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Volvo V50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 V50 — Year-Specific Fitment Context
The 2010 Volvo V50 is in year 6 of 7 using the 5x108 pattern (2005–2011). Wheels from any 2005–2011 Volvo V50 are cross-compatible with the 2010 model.
Volvo V50 Bolt Pattern by Year
The table below shows how the V50's wheel specifications have changed over the years. The 2010 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2010 Volvo V50
When selecting wheels for your 2010 Volvo V50, the 5x108 bolt pattern is shared with 2005–2011 models, ensuring cross-compatibility. However, the 63.4mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut specifications: M12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50-100 miles and avoid mixing wheel types.
Historical Fitment Data Reference
In our dataset, Volvo V50 appears from 2005 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 63.4mm bore precisely.
- ✅ Avoid spacers unless necessary; they alter offset and may require longer studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Volvo V50 — Frequently Asked Questions
What is the bolt pattern for a 2010 Volvo V50?
The 2010 Volvo V50 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo V50 have the same bolt pattern as the 2010?
The Volvo V50 uses the 5x108 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will wheels from another Volvo fit my 2010 V50?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
What is the PCD for a 2010 Volvo V50?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 V50, the PCD is 5x108.
How do I measure the bolt pattern on my 2010 Volvo?
The 2010 V50 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2010 Volvo V50?
The OEM offset for the 2010 V50 is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset