2009 Volvo V50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Volvo V50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 V50 — Year-Specific Fitment Context
The 2009 Volvo V50 is in year 5 of 7 using the 5x108 pattern (2005–2011). Wheels from any 2005–2011 Volvo V50 are cross-compatible with the 2009 model.
Volvo V50 Bolt Pattern by Year
The table below shows how the V50's wheel specifications have changed over the years. The 2009 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2009 Volvo V50
When selecting wheels for your 2009 Volvo V50, the 5x108 bolt pattern is shared with 2005–2011 models, ensuring cross-compatibility. However, the 63.4mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut specifications: use 12x1.50 thread pitch with conical (60-degree) or ball seats as original. Never mix seat types—this can lead to loose wheels. For safety, re-torque after 50-100 miles and check periodically.
Historical Fitment Data Reference
In our dataset, Volvo V50 appears from 2005 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (63.4mm ID to aftermarket bore) to avoid steering wheel vibration.
- ✅ Stick to offset 40-50mm; lower offsets may rub fenders, higher offsets risk brake caliper contact.
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles; use a torque wrench, not an impact gun.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Volvo V50 — Frequently Asked Questions
What is the bolt pattern for a 2009 Volvo V50?
The 2009 Volvo V50 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo V50 have the same bolt pattern as the 2009?
The Volvo V50 uses the 5x108 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2009 Volvo V50?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2009 Volvo V50s use lug bolts or lug nuts?
The 2009 V50 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2009 Volvo V50 use?
The 2009 Volvo V50 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2009 Volvo V50?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset