2011 Volvo V50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Volvo V50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 V50 — Year-Specific Fitment Context
The 2011 model year is the final year of the Volvo V50's 5x108 bolt pattern run (since 2005). Wheels from any 2005–2011 Volvo V50 are cross-compatible with the 2011 model.
Volvo V50 Bolt Pattern by Year
The table below shows how the V50's wheel specifications have changed over the years. The 2011 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2011 Volvo V50
For your 2011 Volvo V50, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use ball seats, while aftermarket may require conical (60-degree) or ball seats. Mismatched lug nuts can cause wheel loosening. Verify lug nut engagement: at least 6-8 full turns. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volvo V50 appears from 2005 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 40mm to prevent rubbing on struts or fenders.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 63.4mm bore.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Volvo V50 — Frequently Asked Questions
What is the bolt pattern for a 2011 Volvo V50?
The 2011 Volvo V50 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo V50 have the same bolt pattern as the 2011?
The Volvo V50 uses the 5x108 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What does 46mm offset mean for the 2011 V50?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
Do 2011 Volvo V50s use lug bolts or lug nuts?
The 2011 V50 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2011 Volvo V50?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 V50, the PCD is 5x108.
How tight should I torque the lug nuts on a 2011 Volvo V50?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset