2008 Volvo V50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Volvo V50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 V50 — Year-Specific Fitment Context
The 2008 Volvo V50 is in year 4 of 7 using the 5x108 pattern (2005–2011). Wheels from any 2005–2011 Volvo V50 are cross-compatible with the 2008 model.
Volvo V50 Bolt Pattern by Year
The table below shows how the V50's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2008 Volvo V50
When selecting wheels for your 2008 Volvo V50, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use ball seats, while aftermarket typically use conical (60-degree) seats. Mixing seat types can lead to wheel loosening. Verify that the wheel's load rating meets or exceeds the V50's requirements. For safety, avoid spacers unless professionally installed.
Historical Fitment Data Reference
In our dataset, Volvo V50 appears from 2005 to 2011 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are aluminum or plastic and properly seated.
- ✅ Check for brake caliper clearance, especially with 17-inch or larger wheels; some aftermarket designs may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Volvo V50 — Frequently Asked Questions
What is the bolt pattern for a 2008 Volvo V50?
The 2008 Volvo V50 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo V50 have the same bolt pattern as the 2008?
The Volvo V50 uses the 5x108 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Volvo V50?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Will wheels from another Volvo fit my 2008 V50?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Do 2008 Volvo V50s use lug bolts or lug nuts?
The 2008 V50 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2008 Volvo V50?
The OEM offset for the 2008 V50 is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset