2007 Volvo V50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Volvo V50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 V50 — Year-Specific Fitment Context
The 2007 Volvo V50 is in year 3 of 7 using the 5x108 pattern (2005–2011). Wheels from any 2005–2011 Volvo V50 are cross-compatible with the 2007 model.
Volvo V50 Bolt Pattern by Year
The table below shows how the V50's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Volvo V50 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo V50 appears from 2005 to 2011 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2007 Volvo V50 — Frequently Asked Questions
What is the bolt pattern for a 2007 Volvo V50?
The 2007 Volvo V50 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo V50 have the same bolt pattern as the 2007?
The Volvo V50 uses the 5x108 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2007 Volvo V50?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 46mm, and a center bore of at least 63.4mm (using hub rings if larger).
What is the PCD for a 2007 Volvo V50?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 V50, the PCD is 5x108.
What is the center bore of a 2007 Volvo V50?
The factory center bore (hub bore) for the 2007 Volvo V50 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2007 Volvo V50s use lug bolts or lug nuts?
The 2007 V50 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volvo V50 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2005-2011 (7 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Volvo V50, please report it via our About page contact so we can verify and update this record.