2013 Lincoln MKT Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2013 Lincoln MKT is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 40, and utilizes N 12x1.50 (Cone seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2013 Lincoln MKT Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | N 12x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 MKT — Year-Specific Fitment Context
The 2013 Lincoln MKT is in year 4 of 10 using the 5x114.3 pattern (2010–2019). Wheels from any 2010–2019 Lincoln MKT are cross-compatible with the 2013 model.
Lincoln MKT Bolt Pattern by Year
The table below shows how the MKT's wheel specifications have changed over the years. The 2013 model year is highlighted.
2013 Lincoln MKT Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2013 Lincoln MKT, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2013 Mitsubishi Outlander Sport | 67.1 mm (Exact) | 38 | N 12x1.50 (Cone) |
| 1992 Mitsubishi Precis | 67.1 mm (Exact) | 38-46 | 12x1.5 (Cone) |
| 2005 Panoz Esperante | 67.1 mm (Exact) | 30-40mm | 1/2-20 (Cone) |
| 1992 Plymouth Laser | 67.1 mm (Exact) | 35-45mm | M12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 Plymouth Grand Voyager | 71.5 mm | 71.5mm → 67.1mm |
40 |
| 1997 Plymouth Prowler | 71.5 mm | 71.5mm → 67.1mm |
30 |
| 1992 Plymouth Voyager | 71.5 mm | 71.5mm → 67.1mm |
40 |
| 1992 Pontiac Grand Prix | 70.1 mm | 70.1mm → 67.1mm |
52 |
| 2024 Ram P51 Mustang | 70.5 mm | 70.5mm → 67.1mm |
35-45 |
Expert Buying Guide for 2013 Lincoln MKT
For the 2013 Lincoln MKT, the critical center bore is 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; the factory spec is 40mm, but a range of 35-45mm is acceptable. Deviating beyond this can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Using incorrect lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain safety and performance.
Historical Fitment Data Reference
In our dataset, Lincoln MKT appears from 2010 to 2019 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; vibration and stress on studs may occur.
- ✅ When changing offset, measure clearance to the strut and fender; a 5mm spacer may be needed for some aftermarket wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2013 Lincoln MKT — Frequently Asked Questions
What is the bolt pattern for a 2013 Lincoln MKT?
The 2013 Lincoln MKT uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 40mm.
What other years of Lincoln MKT have the same bolt pattern as the 2013?
The Lincoln MKT uses the 5x114.3 pattern from 2010 through 2019. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What lug nut size does the 2013 Lincoln MKT use?
The 2013 Lincoln MKT uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2013 Lincoln?
The 2013 MKT uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2013 Lincoln MKT?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 67.1mm (using hub rings if larger).
Why is matching the 67.1mm center bore important for the 2013 MKT?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →