2009 Toyota Sienna Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Toyota Sienna, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2009 Sienna — Year-Specific Fitment Context
The 2009 Toyota Sienna is in year 12 of 27 using the 5x114.3 pattern (1998–2024). Wheels from any 1998–2024 Toyota Sienna are cross-compatible with the 2009 model.
Toyota Sienna Bolt Pattern by Year
The table below shows how the Sienna's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x114.3 | 60.1 | 35-45 |
| 1999 | 5x114.3 | 60.1 | 35-45 |
| 2000 | 5x114.3 | 60.1 | 35-45 |
| 2001 | 5x114.3 | 60.1 | 35-45 |
| 2002 | 5x114.3 | 60.1 | 35-45 |
| 2003 | 5x114.3 | 60.1 | 35-45 |
| 2004 | 5x114.3 | 60.1 | 35-45 |
| 2005 | 5x114.3 | 60.1 | 35-45 |
| 2006 | 5x114.3 | 60.1 | 35-45 |
| 2007 | 5x114.3 | 60.1 | 35-45 |
| 2008 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2009 | 5x114.3 | 60.1 | 35-45 |
| 2010 | 5x114.3 | 60.1 | 35-45 |
| 2011 | 5x114.3 | 60.1 | 35-45 |
| 2012 | 5x114.3 | 60.1 | 35-45 |
| 2013 | 5x114.3 | 60.1 | 35-45 |
| 2014 | 5x114.3 | 60.1 | 35-45 |
| 2015 | 5x114.3 | 60.1 | 35-45 |
| 2016 | 5x114.3 | 60.1 | 35-45 |
| 2017 | 5x114.3 | 60.1 | 35-45 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2009 Toyota Sienna
For your 2009 Toyota Sienna, the correct bolt pattern is 5x114.3mm with a center bore of 60.1mm. When selecting aftermarket wheels, ensure they have a larger center bore and use hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is 35-45mm; deviating outside this can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat—to match the wheel. Improper lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Sienna appears from 1998 to 2024 (27 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations.
- ✅ Check for brake caliper clearance when using wheels with offset below 35mm or above 45mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Toyota Sienna — Frequently Asked Questions
What is the bolt pattern for a 2009 Toyota Sienna?
The 2009 Toyota Sienna uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Sienna have the same bolt pattern as the 2009?
The Toyota Sienna uses the 5x114.3 pattern from 1998 through 2024. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What lug nut size does the 2009 Toyota Sienna use?
The 2009 Toyota Sienna uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2009 Toyota?
The 2009 Sienna uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2009 Toyota Sienna?
The factory center bore (hub bore) for the 2009 Toyota Sienna is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2009 Toyota Sienna?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset