2019 Toyota Sienna Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota Sienna, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Sienna — Year-Specific Fitment Context
The 2019 Toyota Sienna is in year 22 of 27 using the 5x114.3 pattern (1998–2024). Wheels from any 1998–2024 Toyota Sienna are cross-compatible with the 2019 model.
Toyota Sienna Bolt Pattern by Year
The table below shows how the Sienna's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x114.3 | 60.1 | 35-45 |
| 1999 | 5x114.3 | 60.1 | 35-45 |
| 2000 | 5x114.3 | 60.1 | 35-45 |
| 2001 | 5x114.3 | 60.1 | 35-45 |
| 2002 | 5x114.3 | 60.1 | 35-45 |
| 2003 | 5x114.3 | 60.1 | 35-45 |
| 2004 | 5x114.3 | 60.1 | 35-45 |
| 2005 | 5x114.3 | 60.1 | 35-45 |
| 2006 | 5x114.3 | 60.1 | 35-45 |
| 2007 | 5x114.3 | 60.1 | 35-45 |
| 2008 | 5x114.3 | 60.1 | 35-45 |
| 2009 | 5x114.3 | 60.1 | 35-45 |
| 2010 | 5x114.3 | 60.1 | 35-45 |
| 2011 | 5x114.3 | 60.1 | 35-45 |
| 2012 | 5x114.3 | 60.1 | 35-45 |
| 2013 | 5x114.3 | 60.1 | 35-45 |
| 2014 | 5x114.3 | 60.1 | 35-45 |
| 2015 | 5x114.3 | 60.1 | 35-45 |
| 2016 | 5x114.3 | 60.1 | 35-45 |
| 2017 | 5x114.3 | 60.1 | 35-45 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Toyota Sienna
When selecting aftermarket wheels for your 2019 Toyota Sienna, the 60.1mm center bore is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Without rings, lug nuts bear all stress, risking loosening. Offset must stay within 35-45mm; deviating can cause rubbing or premature bearing wear. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—the Sienna uses conical (60-degree) seats. Flat or ball seats are unsafe. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Toyota Sienna appears from 1998 to 2024 (27 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings with aftermarket wheels to match the 60.1mm center bore; plastic rings are acceptable for street use.
- ✅ Verify offset with a test fit; even 5mm deviation from the 35-45mm range may cause inner clearance issues with struts or outer fender rubbing.
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles; never use anti-seize on lug studs as it reduces clamping force.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota Sienna — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota Sienna?
The 2019 Toyota Sienna uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Sienna have the same bolt pattern as the 2019?
The Toyota Sienna uses the 5x114.3 pattern from 1998 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Do 2019 Toyota Siennas use lug bolts or lug nuts?
The 2019 Sienna requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Toyota fit my 2019 Sienna?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
How tight should I torque the lug nuts on a 2019 Toyota Sienna?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 60.1mm center bore important for the 2019 Sienna?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset