2013 Toyota Sienna Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Toyota Sienna, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 Sienna — Year-Specific Fitment Context
The 2013 Toyota Sienna is in year 16 of 27 using the 5x114.3 pattern (1998–2024). Wheels from any 1998–2024 Toyota Sienna are cross-compatible with the 2013 model.
Toyota Sienna Bolt Pattern by Year
The table below shows how the Sienna's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x114.3 | 60.1 | 35-45 |
| 1999 | 5x114.3 | 60.1 | 35-45 |
| 2000 | 5x114.3 | 60.1 | 35-45 |
| 2001 | 5x114.3 | 60.1 | 35-45 |
| 2002 | 5x114.3 | 60.1 | 35-45 |
| 2003 | 5x114.3 | 60.1 | 35-45 |
| 2004 | 5x114.3 | 60.1 | 35-45 |
| 2005 | 5x114.3 | 60.1 | 35-45 |
| 2006 | 5x114.3 | 60.1 | 35-45 |
| 2007 | 5x114.3 | 60.1 | 35-45 |
| 2008 | 5x114.3 | 60.1 | 35-45 |
| 2009 | 5x114.3 | 60.1 | 35-45 |
| 2010 | 5x114.3 | 60.1 | 35-45 |
| 2011 | 5x114.3 | 60.1 | 35-45 |
| 2012 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2013 | 5x114.3 | 60.1 | 35-45 |
| 2014 | 5x114.3 | 60.1 | 35-45 |
| 2015 | 5x114.3 | 60.1 | 35-45 |
| 2016 | 5x114.3 | 60.1 | 35-45 |
| 2017 | 5x114.3 | 60.1 | 35-45 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 Toyota Sienna
For your 2013 Toyota Sienna, the 5x114.3 bolt pattern is shared across 1998–2024 models, enabling cross-compatibility. The 60.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and ensure load support. Offset must stay within 35-45mm; deviations risk rubbing or bearing stress. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats; aftermarket may require ball or conical. Verify thread engagement (at least 7 turns) and torque to 76 ft-lbs. Avoid wheel spacers unless hub-centric and properly torqued.
Historical Fitment Data Reference
In our dataset, Toyota Sienna appears from 1998 to 2024 (27 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Aftermarket wheels often have a larger center bore; always use hub-centric rings to match the 60.1mm hub.
- ✅ Check for caliper clearance with 18-inch or larger wheels; some aftermarket designs may interfere with the brake caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Toyota Sienna — Frequently Asked Questions
What is the bolt pattern for a 2013 Toyota Sienna?
The 2013 Toyota Sienna uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Sienna have the same bolt pattern as the 2013?
The Toyota Sienna uses the 5x114.3 pattern from 1998 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Can I use spacers on my 2013 Toyota Sienna?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the PCD for a 2013 Toyota Sienna?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 Sienna, the PCD is 5x114.3.
How tight should I torque the lug nuts on a 2013 Toyota Sienna?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 60.1mm center bore important for the 2013 Sienna?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset