2024 Toyota Sienna Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota Sienna, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Sienna — Year-Specific Fitment Context
The 2024 model year is the final year of the Toyota Sienna's 5x114.3 bolt pattern run (since 1998). Wheels from any 1998–2024 Toyota Sienna are cross-compatible with the 2024 model.
Toyota Sienna Bolt Pattern by Year
The table below shows how the Sienna's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x114.3 | 60.1 | 35-45 |
| 1999 | 5x114.3 | 60.1 | 35-45 |
| 2000 | 5x114.3 | 60.1 | 35-45 |
| 2001 | 5x114.3 | 60.1 | 35-45 |
| 2002 | 5x114.3 | 60.1 | 35-45 |
| 2003 | 5x114.3 | 60.1 | 35-45 |
| 2004 | 5x114.3 | 60.1 | 35-45 |
| 2005 | 5x114.3 | 60.1 | 35-45 |
| 2006 | 5x114.3 | 60.1 | 35-45 |
| 2007 | 5x114.3 | 60.1 | 35-45 |
| 2008 | 5x114.3 | 60.1 | 35-45 |
| 2009 | 5x114.3 | 60.1 | 35-45 |
| 2010 | 5x114.3 | 60.1 | 35-45 |
| 2011 | 5x114.3 | 60.1 | 35-45 |
| 2012 | 5x114.3 | 60.1 | 35-45 |
| 2013 | 5x114.3 | 60.1 | 35-45 |
| 2014 | 5x114.3 | 60.1 | 35-45 |
| 2015 | 5x114.3 | 60.1 | 35-45 |
| 2016 | 5x114.3 | 60.1 | 35-45 |
| 2017 | 5x114.3 | 60.1 | 35-45 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Toyota Sienna
For the 2024 Toyota Sienna, the correct bolt pattern is 5x114.3 with a center bore of 60.1mm. When selecting aftermarket wheels, hub-centric rings are essential to ensure the wheel is centered on the hub, preventing vibrations and stress on lug studs. The offset range is 35-45mm; staying within this range maintains proper suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel loosening or damage. Verify that aftermarket wheels have a bore diameter of at least 60.1mm or use rings to adapt.
Historical Fitment Data Reference
In our dataset, Toyota Sienna appears from 1998 to 2024 (27 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and premature wear.
- ✅ Check that aftermarket wheels clear the brake calipers, especially on models with larger brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Toyota Sienna — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Sienna?
The 2024 Toyota Sienna uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Sienna have the same bolt pattern as the 2024?
The Toyota Sienna uses the 5x114.3 pattern from 1998 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Do 2024 Toyota Siennas use lug bolts or lug nuts?
The 2024 Sienna requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2024 Toyota Sienna?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
What lug nut size does the 2024 Toyota Sienna use?
The 2024 Toyota Sienna uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 60.1mm center bore important for the 2024 Sienna?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset