2017 Toyota Sienna Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Toyota Sienna, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 Sienna — Year-Specific Fitment Context
The 2017 Toyota Sienna is in year 20 of 27 using the 5x114.3 pattern (1998–2024). Wheels from any 1998–2024 Toyota Sienna are cross-compatible with the 2017 model.
Toyota Sienna Bolt Pattern by Year
The table below shows how the Sienna's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x114.3 | 60.1 | 35-45 |
| 1999 | 5x114.3 | 60.1 | 35-45 |
| 2000 | 5x114.3 | 60.1 | 35-45 |
| 2001 | 5x114.3 | 60.1 | 35-45 |
| 2002 | 5x114.3 | 60.1 | 35-45 |
| 2003 | 5x114.3 | 60.1 | 35-45 |
| 2004 | 5x114.3 | 60.1 | 35-45 |
| 2005 | 5x114.3 | 60.1 | 35-45 |
| 2006 | 5x114.3 | 60.1 | 35-45 |
| 2007 | 5x114.3 | 60.1 | 35-45 |
| 2008 | 5x114.3 | 60.1 | 35-45 |
| 2009 | 5x114.3 | 60.1 | 35-45 |
| 2010 | 5x114.3 | 60.1 | 35-45 |
| 2011 | 5x114.3 | 60.1 | 35-45 |
| 2012 | 5x114.3 | 60.1 | 35-45 |
| 2013 | 5x114.3 | 60.1 | 35-45 |
| 2014 | 5x114.3 | 60.1 | 35-45 |
| 2015 | 5x114.3 | 60.1 | 35-45 |
| 2016 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2017 | 5x114.3 | 60.1 | 35-45 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Toyota Sienna
For your 2017 Toyota Sienna, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35-45mm; deviating can cause rubbing or premature bearing wear. Always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (cone or ball) to avoid wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and never rely solely on lug nuts for centering. Safety first: improper fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, Toyota Sienna appears from 1998 to 2024 (27 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check that aftermarket wheels clear the brake calipers, especially on models with larger brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Toyota Sienna — Frequently Asked Questions
What is the bolt pattern for a 2017 Toyota Sienna?
The 2017 Toyota Sienna uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Sienna have the same bolt pattern as the 2017?
The Toyota Sienna uses the 5x114.3 pattern from 1998 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the center bore of a 2017 Toyota Sienna?
The factory center bore (hub bore) for the 2017 Toyota Sienna is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 35-45mm offset mean for the 2017 Sienna?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Why is matching the 60.1mm center bore important for the 2017 Sienna?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Toyota fit my 2017 Sienna?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset