1995 Chrysler Concorde Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Chrysler Concorde, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 71.6 mm
Offset (ET) 40
Torque Specs 80 ft-lbs (108 Nm)

1995 Concorde — Year-Specific Fitment Context

The 1995 Chrysler Concorde is in year 3 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Chrysler Concorde are cross-compatible with the 1995 model.

Chrysler Concorde Bolt Pattern by Year

The table below shows how the Concorde's wheel specifications have changed over the years. The 1995 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1993 5x114.3 71.6 40
1994 5x114.3 71.6 40
▸ 1995 5x114.3 71.6 40
1996 5x114.3 71.6 40
1997 5x114.3 71.6 40
1998 5x114.3 71.6 40
1999 5x114.3 71.6 40
2000 5x114.3 71.6 40
2001 5x114.3 71.6 40
2002 5x114.3 71.6 40
2003 5x114.3 71.6 40
2004 5x114.3 71.6 40

Fitment Notes

The 1995 Chrysler Concorde has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Chrysler Concorde appears from 1993 to 2004 (12 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

1995 Chrysler Concorde — Frequently Asked Questions

What is the bolt pattern for a 1995 Chrysler Concorde?

The 1995 Chrysler Concorde uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.

What other years of Chrysler Concorde have the same bolt pattern as the 1995?

The Chrysler Concorde uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.

Will wheels from another Chrysler fit my 1995 Concorde?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.

What is the center bore of a 1995 Chrysler Concorde?

The factory center bore (hub bore) for the 1995 Chrysler Concorde is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Can I put aftermarket wheels on my 1995 Chrysler Concorde?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).

What does 40mm offset mean for the 1995 Concorde?

An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chrysler.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Chrysler Concorde is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1995 Chrysler Concorde, please report it via our About page contact so we can verify and update this record.

Chrysler Concorde By Year

1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004

Other Chrysler Models

200 300 300M Aspen Cirrus Concorde Crossfire Fifth Ave Grand Voyager Imperial LHS LeBaron New Yorker PT Cruiser Pacifica Pacifica Hybrid Prowler Sebring Town & Country Voyager