2001 Chrysler Concorde Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Chrysler Concorde, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 Concorde — Year-Specific Fitment Context
The 2001 Chrysler Concorde is in year 9 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Chrysler Concorde are cross-compatible with the 2001 model.
Chrysler Concorde Bolt Pattern by Year
The table below shows how the Concorde's wheel specifications have changed over the years. The 2001 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Chrysler Concorde
When selecting wheels for your 2001 Chrysler Concorde, the center bore must be 71.6mm or larger; if larger, use hub-centric rings to prevent vibration and ensure proper load distribution. The offset should stay close to 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and matching seat type—either conical (60-degree) or ball seat—to avoid wheel loosening. Never mix seat types. Verify that aftermarket wheels are load-rated for the Concorde's weight. Proper fitment is critical for safety and performance.
Historical Fitment Data Reference
In our dataset, Chrysler Concorde appears from 1993 to 2004 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving, then periodically check.
- ✅ Avoid using wheels from other Chrysler models with different center bores without hub rings.
- ✅ Inspect for caliper clearance when using wheels with offset less than 35mm or greater than 45mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Chrysler Concorde — Frequently Asked Questions
What is the bolt pattern for a 2001 Chrysler Concorde?
The 2001 Chrysler Concorde uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Concorde have the same bolt pattern as the 2001?
The Chrysler Concorde uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the PCD for a 2001 Chrysler Concorde?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Concorde, the PCD is 5x114.3.
What is the factory wheel offset for a 2001 Chrysler Concorde?
The OEM offset for the 2001 Concorde is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2001 Chrysler Concorde?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the center bore of a 2001 Chrysler Concorde?
The factory center bore (hub bore) for the 2001 Chrysler Concorde is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset