1997 Chrysler Concorde Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Chrysler Concorde, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1997 Concorde — Year-Specific Fitment Context
The 1997 Chrysler Concorde is in year 5 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Chrysler Concorde are cross-compatible with the 1997 model.
Chrysler Concorde Bolt Pattern by Year
The table below shows how the Concorde's wheel specifications have changed over the years. The 1997 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1997 Chrysler Concorde
For your 1997 Chrysler Concorde, the bolt pattern is 5x114.3mm, but critical fitment details include a 71.6mm center bore and 40mm offset. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: staying within ±5mm of 40mm maintains proper suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a cone seat; aftermarket may require ball or tapered seats. Incorrect lug nuts can cause wheel loss. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Chrysler Concorde appears from 1993 to 2004 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub rings; the 71.6mm bore is smaller than many aftermarket wheels.
- ✅ Check for caliper clearance with aftermarket wheels; the 1997 Concorde has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Chrysler Concorde — Frequently Asked Questions
What is the bolt pattern for a 1997 Chrysler Concorde?
The 1997 Chrysler Concorde uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Concorde have the same bolt pattern as the 1997?
The Chrysler Concorde uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Will wheels from another Chrysler fit my 1997 Concorde?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
What does 40mm offset mean for the 1997 Concorde?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chrysler.
How tight should I torque the lug nuts on a 1997 Chrysler Concorde?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 1997 Chrysler Concorde?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset