2000 Chrysler Concorde Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Chrysler Concorde, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 Concorde — Year-Specific Fitment Context
The 2000 Chrysler Concorde is in year 8 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Chrysler Concorde are cross-compatible with the 2000 model.
Chrysler Concorde Bolt Pattern by Year
The table below shows how the Concorde's wheel specifications have changed over the years. The 2000 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Chrysler Concorde
For the 2000 Chrysler Concorde, the bolt pattern is 5x114.3 with a critical center bore of 71.6mm. Aftermarket wheels often have a larger bore, so hub-centric rings (71.6mm ID to wheel bore OD) are mandatory to prevent vibration and ensure load is on the hub, not the lug nuts. The factory offset is around 40mm; deviations beyond ±5mm may cause rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or flat seats. Incorrect lug nuts can lead to wheel loosening. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Chrysler Concorde appears from 1993 to 2004 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub rings; the 71.6mm bore is specific and mismatch causes vibration.
- ✅ Check inner clearance for brake calipers and suspension components when using aftermarket wheels with offset outside 35-45mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Chrysler Concorde — Frequently Asked Questions
What is the bolt pattern for a 2000 Chrysler Concorde?
The 2000 Chrysler Concorde uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Concorde have the same bolt pattern as the 2000?
The Chrysler Concorde uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Why is matching the 71.6mm center bore important for the 2000 Concorde?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2000 Chrysler Concorde?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).
What lug nut size does the 2000 Chrysler Concorde use?
The 2000 Chrysler Concorde uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2000 Chrysler Concordes use lug bolts or lug nuts?
The 2000 Concorde requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset