1998 Chrysler Concorde Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Chrysler Concorde, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1998 Concorde — Year-Specific Fitment Context
The 1998 Chrysler Concorde is in year 6 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Chrysler Concorde are cross-compatible with the 1998 model.
Chrysler Concorde Bolt Pattern by Year
The table below shows how the Concorde's wheel specifications have changed over the years. The 1998 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1998 Chrysler Concorde
For your 1998 Chrysler Concorde, the 5x114.3 bolt pattern is shared across 1993–2004 models, but the 71.6mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 40mm; staying within ±5mm avoids rubbing or clearance issues with suspension and fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Never mix seat types, as improper engagement can cause wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Chrysler Concorde appears from 1993 to 2004 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid using universal fitment wheels without verifying center bore; hub rings are mandatory for safe fitment.
- ✅ Check for caliper clearance when using wheels with offset below 35mm, as the Concorde's front brakes are tight.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Chrysler Concorde — Frequently Asked Questions
What is the bolt pattern for a 1998 Chrysler Concorde?
The 1998 Chrysler Concorde uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Concorde have the same bolt pattern as the 1998?
The Chrysler Concorde uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
What lug nut size does the 1998 Chrysler Concorde use?
The 1998 Chrysler Concorde uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 1998 Chrysler?
The 1998 Concorde uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1998 Chrysler Concorde?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).
Can I use spacers on my 1998 Chrysler Concorde?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset