2002 Chrysler Concorde Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Chrysler Concorde, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2002 Concorde — Year-Specific Fitment Context
The 2002 Chrysler Concorde is in year 10 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Chrysler Concorde are cross-compatible with the 2002 model.
Chrysler Concorde Bolt Pattern by Year
The table below shows how the Concorde's wheel specifications have changed over the years. The 2002 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2002 Chrysler Concorde
For your 2002 Chrysler Concorde, the 5x114.3 bolt pattern is shared with 1993–2004 models, but the 71.6mm center bore is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 40mm, but 35–45mm is acceptable; lower offset pushes wheels outward, risking fender rub and bearing stress. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a cone seat, while aftermarket may require ball or tapered seats. Mismatched lug nuts can cause wheel loosening. Verify lug nut engagement (minimum 6 full turns) and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Chrysler Concorde appears from 1993 to 2004 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving to account for wheel seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 71.6mm bore is unique and rings prevent vibration.
- ✅ Check for caliper clearance when using wheels with offset below 35mm, as the Concorde's front brakes are large.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Chrysler Concorde — Frequently Asked Questions
What is the bolt pattern for a 2002 Chrysler Concorde?
The 2002 Chrysler Concorde uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Concorde have the same bolt pattern as the 2002?
The Chrysler Concorde uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2002 Chrysler Concorde?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).
What is the factory wheel offset for a 2002 Chrysler Concorde?
The OEM offset for the 2002 Concorde is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 71.6mm center bore important for the 2002 Concorde?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2002 Chrysler?
The 2002 Concorde uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset